RGH 1st attempt to a corona need some advice

Beaver_Buffcoat

Beaver_Buffcoat

BANNED
Jul 19, 2014
202
0
Sunny Florida
ultimate360 said:
Did you get save your CPU key? If you did, I would go ahead and create the Freeboot image using autogg newest version with glitch2m ticked, might solver your issue here. Also, is r1r1 removed?

I know this is usually the case for the v6 and is easily fixed with autogg
Click to expand...
He switched to a phat console after reverting the v6 to stock. At least I think he said that. :D
 
Last edited:
ultimate360

ultimate360

VIP Member
Nov 11, 2013
786
48
MN, USA
sami83 said:
HI EVERYBODY , PLZ HELP , I LOST MY ORIGINAL NAND IXBOX SLIM CORONA V2 , AND I HAVE THE LAST KIT QSB CONNECTED IN MY MOTHERBOARD NO PROBLEM TO READING , I WAS TRYING TO CREATE A NEW ORIGINAL NAND EVERYTHING SUCCES , BUT WHEN I GO TO BOOT MY CONSOLE NO XELL APPEAR AND NO VIDEO SIGNAL , I HAVE A GREEN LIGHT PERMENTLY IN THE CENTER , IAM BIGINNER LOST ABOUT THE CONFUSED INFORMATION IN DIFFERANT FORUMS .
I WILL APRICIATE YOUR HELP SO MUCH
Click to expand...
Don't do this, I already see your started thread about this issue, others will as well. We will help you in your thread, don't post that in someone else's thread, it won't help you any more anyways.
 
  • Like
Reactions: fokeiro and Beaver_Buffcoat
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
Jasper boot to custom nand but boot times are really messed up could be from 8 sec to 2 mins...im using cap bridge..jp open..1/2 and the fat blue cable on top of fans


Any advices to makw it more stable im not looking for instant but decents are ok for me
 
Last edited:
Beaver_Buffcoat

Beaver_Buffcoat

BANNED
Jul 19, 2014
202
0
Sunny Florida
fokeiro said:
Jasper boot to custom nand but boot times are really messed up could be from 8 sec to 2 mins...im using cap bridge..jp open..1/2 and the fat blue cable on top of fans


Any advices to makw it more stable im not looking for instant but decents are ok for me
Click to expand...
Try routing the blue wire around the x-clamp.

cpu_rst_xclamp.jpg
 
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
Thw weirdest thing is happening...with power xbox turn on but wont boot...now with eject instead of xell...it boots normally and works fine with xexmenu ...wtf happened here...i didnt change anything on jrunner just created image and flashed it
 
Beaver_Buffcoat

Beaver_Buffcoat

BANNED
Jul 19, 2014
202
0
Sunny Florida
Checking out for the evening. My parting advice is to check your NAND wiring/soldering and build a new RGH NAND using your clean retail NAND and rewrite. Don't forget to disconnect power after.

I'll check in tomorrow. Good luck in the meantime.
 
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
i mean as long as it boot, i tried setting the launch.ini with dashlaunch, works fine, freestyle works fine, everything works good , weirdest thing i just dont want to mess it up if its working i doubt ill need xell again in case i just hardware flash it
 
Beaver_Buffcoat

Beaver_Buffcoat

BANNED
Jul 19, 2014
202
0
Sunny Florida
It's definitely not normal for the Xbox to boot to metro dash with the DVD eject button (unless your NAND is retail), but if you're okay with it and you aren't having other issues, I don't see any harm in leaving it.
 
Last edited:
  • Like
Reactions: fokeiro
F

fokeiro

Senior Member
Feb 1, 2010
125
0
MIAMI, FLORIDA
yeah exactly what i was thinking but since xexmenu works and dash and freestyle then cant be retail unless i discovered something never seen before lol
 
You must log in or register to reply here.