2.6ce frag problem

[chemicalwahoo]

hi yall im rather confused. Ive checkeed my soldering 50 times so its definatly fine. I have a 1.1 xbox and i am using a 2.6ce chip. I flashed the bios on bank one. I then installed a desktop i got from xbins. It worked great untill i realized it wouldnt relock my hardrive that i had goofed off and unlocked b4. When i switched to bank two where the other bios was i found out that that one was fragging. now both banks are fragging( 2 boots then red green lights).

when i boot up wihtout the chip i get the flubber screen and an error saying my box is locked. but when i start it up with the chip ir fraggs on both banks.

I know i need to reflash it but how if its fraggin????

 

[islander223]

If both banks are fragging then you need a programmer or a hotswap.

 

[MKChampion]

which bios did you flash to both banks?
what size bios did you flash?
what were you doing prior to it fragging?
did you change any settings?

 

[Fantmx]

If all you did was flip the bank selector switch, it has nothing to do with the bios. It is most likely a problem with the switches. Check them with a multimeter. You could also try pushing the bank selector switch in as you flip banks.