250 gig Hard drive problems

[gamer1602]

I have installed a 250 gig hard drive in my box that is modded with a x3. When i format the drive it only puts 120 gig in the F file and the rest in the G file. In the X3live i tried to tell it to put all in F and none in G but it didnt work. Any ideas??? THANKS!!!

 

[da_supa_fish]

did u put those settings in b4 or after u did the format? cuz if u did it after thats why...

 

[braves95]

Yes you must tell the xbox live config that you want all in f and none in g. Or tell it to put x amount in f and the rest in g. Make sure you read the osd. It is all there. I went to the slayers. Then went to config live and i opted to use the config live and BAM it worked.

 

[SupremeHolyness]

Please help im getting nowhere!!!!

Hi im having serious trouble flashing my hitachi 47dj drive. Here is my setup:
I have a good laptop with a esata express card but i have no install disc for it. I also have a usb to sata converter. alternatively i have a pc with a via vt6421a pci card but it is extremely slow (128 mb ram) . Using the pc i can get jungleflasher to recognise the drive and send mode b and then windows recognises the drive, but neither jungleflasher or fw toolbox can communicate with the drive. with the laptop i can get the drive in mode b using the resistor trick and successfully dump the drive and get the key but i cant flash it with either programmes.

I have successfully flashed many benq drives with my pc but im getting nowhere with this hitachi

Any help would be greatly appreciated, thank you

 

[Farly]

Re: Please help im getting nowhere!!!!

Install the drivers for you esata card.
or
when using your other PC use the onboard SATA connections, not the VT6421 card.