RGH 256MB Jasper won't glitch with DVD drive

[poisins]

So. Just glitched my xbox. Used capacitor and box glitches almoust instantly (max 5 sec).

Console boots and doesn't freezes when no dvd is attached. It won't glitch or freezes (if glitched) when DVD drive is connected. Haven't tried with HDD connected.

I have replaced 33ohm resistor near point B. Point C is soldered to trace (messed point). Point A is soldered on alt point (original point is good... it just don't glitched... even with wire repositioning). Point D is soldered on upper side of board.

So, every wire is on boards upper side.

Messed around that box all evening.
Hope to solve that problem.

Sent from my GW620 (OpenEve 2.3.4) using Tapatalk

 

[Martin C]

pic of your wiring please!

I'm 99% sure it's down to wire placement.

1% that you've disturbed one of the other resistors near the HANA.

 

[poisins]

Tested all resistors near HANA. All are working.
Console boots to Xell in both cases - with and without DVD. Dash boots only without DVD.

With HDD connected, don't glitch at all.

Sorry for quality... all done with my Olympus VG-110

Video:
[ame="http://www.youtube.com/watch?v=pVOMor2Wa5w"]http://www.youtube.com/watch?v=pVOMor2Wa5w[/ame]
---------
Pictures:

 

[Martin C]

"I have replaced 33ohm resistor near point B. Point C is soldered to trace (messed point). Point A is soldered on alt point (original point is good... it just don't glitched... even with wire repositioning). Point D is soldered on upper side of board."

This tells me you've messed with the resistors.

Pics of your work please.

 

[poisins]

This tells me you've messed with the resistors.

Pics of your work please.

Posted on 3rd post!
Uploaded @ Failiem.lv (Latvian file service)

 

[Martin C]

I don't see any high res images in #3 for the area you've worked on.

 

[poisins]

As I said:"Sorry for quality... all done with my Olympus VG-110"

I don't have better camera... Only my compact camera
--
But I have checked all resistors... They shows same resistance

 

[Xmarksthesh0t]

he says take specific pic in that sector.

 

[poisins]

Can't get better with my compact camera. Don't have DSLR

 

[Martin C]

Don't need a DSLR - use macro zoom and a lot of light.

 

[poisins]

OK. I found solution...

Repositioned A, C, and D wires, so they are under board.... Replaced resistor is about 3cm far from HANA chip. Everything runs smoothly! Boot times are for about 2 sec longer.... but thats nothing compared to functioning DVD drive

Leaded wires through small holes near screw holes for Xclamp

Thanks for your help!
---------
Can close this topic.

 

[Martin C]

Glad you got it sorted!

Thread closed as resolved.