R-JTAG 3 RROD install falcon 2007

T

teozfrank

Senior Member
Jan 2, 2013
115
0
Ireland
www.teozcommunity.com
Hi guys,



Console Type: Falcon
NAND size: 16mb
Dashboard version: 2.0.15574
CB version: 5774
Screenshot of NAND details from J-Runner:
nand info.png
J-Runner log:
Checking Files
Finished Checking Files
Falcon Manually Selected
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\frank\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump1.bin
Reading Nand
Error: 250 reading block 2E9
Done!
in 3:36 min:sec

Reading Nand to C:\Users\frank\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Reading Nand
Error: 250 reading block 2E9
Done!
in 3:36 min:sec

Reading Nand to C:\Users\frank\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump3.bin
Comparing...
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Reading Nand
Nands are the same
Error: 250 reading block 2E9
Done!
in 3:36 min:sec

Reading Nand to C:\Users\frank\Downloads\J-Runner v03 (1) Core Pack\J-Runner\output\nanddump4.bin
Comparing...
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Reading Nand
Bad Blocks Remapped
Nands are the same
Error: 250 reading block 2E9
Done!
in 3:36 min:sec

Comparing...
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Nands are the same
XeLL file created Successfully falcon.bin
Version: 10
Flash Config: 0x01198010
Writing Nand
falcon.bin
Done!
in 0:18 min:sec

R-Jtag Selected

===================================================
19 April 2014 22:46:32

J-Runner v0.3 Beta (4) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button


Checking Files
Finished Checking Files
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Comparing...
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Bad Block ID 02E9 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 02E9 [Offset: 0xC01200]
Bad Blocks Remapped
Nands are the same
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon.bin
Version: 10
Flash Config: 0x00000000
Can not Continue
Device Not Found.
Device Not Found.
Initializing falcon.bin..
Header is wrong..
Falcon/Opus
Nand Initialization Finished
Device Not Found.
Device Not Found.
Device Not Found.
Device Not Found.
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon.bin
Device Not Found.
Device Not Found.
Device Not Found.
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon.bin
Device Not Found.
Device Not Found.
Device Not Found.
Device Not Found.
Device Not Found.
Device Not Found.
Device Not Found.
Version: 10
Flash Config: 0x01198010
Writing Nand
falcon.bin
Done!
in 0:18 min:sec

Creating Directory C:\Users\frank\Downloads\J-Runner v03 (1) Core Pack\J-Runner\xeBuild\15574\bin
Downloaded *xeBuild/15574/bin/addon.idx
Downloaded *xeBuild/15574/bin/nofcrt.bin
Downloaded *xeBuild/15574/bin/nohdd.bin
Downloaded *xeBuild/15574/bin/nohdmiwait.bin
Downloaded *xeBuild/15574/bin/nointmu.bin
Downloaded *xeBuild/15574/bin/patches_falcon.bin
Downloaded *xeBuild/15574/bin/patches_fat.bin
Downloaded *xeBuild/15574/bin/patches_g2corona.bin
Downloaded *xeBuild/15574/bin/patches_g2falcon.bin
Downloaded *xeBuild/15574/bin/patches_g2jasper.bin
Downloaded *xeBuild/15574/bin/patches_g2trinity.bin
Downloaded *xeBuild/15574/bin/patches_g2zephyr.bin
Downloaded *xeBuild/15574/bin/patches_jasper.bin
Downloaded *xeBuild/15574/bin/patches_trinity.bin
Downloaded *xeBuild/15574/bin/patches_xenon.bin
Downloaded *xeBuild/15574/bin/patches_zephyr.bin
Downloaded *xeBuild/15574/su20076000_00000000
Downloaded *xeBuild/15574/_glitch.ini
Downloaded *xeBuild/15574/_glitch2.ini
Downloaded *xeBuild/15574/_jtag.ini
Downloaded *xeBuild/15574/_retail.ini
Creating Directory C:\Users\frank\Downloads\J-Runner v03 (1) Core Pack\J-Runner\xeBuild\common
Downloaded *xeBuild/common/cba_13121.bin
Downloaded *xeBuild/common/cba_13180.bin
Downloaded *xeBuild/common/cba_13181.bin
Downloaded *xeBuild/common/cba_1925.bin
Downloaded *xeBuild/common/cba_1926.bin
Downloaded *xeBuild/common/cba_1927.bin
Downloaded *xeBuild/common/cba_1928.bin
Downloaded *xeBuild/common/cba_1941.bin
Downloaded *xeBuild/common/cba_1942.bin
Downloaded *xeBuild/common/cba_4559.bin
Downloaded *xeBuild/common/cba_4560.bin
Downloaded *xeBuild/common/cba_4561.bin
Downloaded *xeBuild/common/cba_4562.bin
Downloaded *xeBuild/common/cba_4569.bin
Downloaded *xeBuild/common/cba_4574.bin
Downloaded *xeBuild/common/cba_4575.bin
Downloaded *xeBuild/common/cba_4576.bin
Downloaded *xeBuild/common/cba_4577.bin
Downloaded *xeBuild/common/cba_5772.bin
Downloaded *xeBuild/common/cba_5773.bin
Downloaded *xeBuild/common/cba_5774.bin
Downloaded *xeBuild/common/cba_6752.bin
Downloaded *xeBuild/common/cba_6753.bin
Downloaded *xeBuild/common/cba_6754.bin
Downloaded *xeBuild/common/cba_7377.bin
Downloaded *xeBuild/common/cba_7378.bin
Downloaded *xeBuild/common/cba_9188.bin
Downloaded *xeBuild/common/cba_9188_mfg.bin
Downloaded *xeBuild/common/cba_9230.bin
Downloaded *xeBuild/common/cba_9231.bin
Downloaded *xeBuild/common/cbb_13121.bin
Downloaded *xeBuild/common/cbb_13180.bin
Downloaded *xeBuild/common/cbb_13181.bin
Downloaded *xeBuild/common/cbb_1925.bin
Downloaded *xeBuild/common/cbb_1926.bin
Downloaded *xeBuild/common/cbb_1927.bin
Downloaded *xeBuild/common/cbb_1928.bin
Downloaded *xeBuild/common/cbb_1941.bin
Downloaded *xeBuild/common/cbb_1942.bin
Downloaded *xeBuild/common/cbb_4559.bin
Downloaded *xeBuild/common/cbb_4560.bin
Downloaded *xeBuild/common/cbb_4561.bin
Downloaded *xeBuild/common/cbb_4562.bin
Downloaded *xeBuild/common/cbb_4569.bin
Downloaded *xeBuild/common/cbb_4574.bin
Downloaded *xeBuild/common/cbb_4575.bin
Downloaded *xeBuild/common/cbb_4576.bin
Downloaded *xeBuild/common/cbb_4577.bin
Downloaded *xeBuild/common/cbb_5772.bin
Downloaded *xeBuild/common/cbb_5773.bin
Downloaded *xeBuild/common/cbb_5774.bin
Downloaded *xeBuild/common/cbb_6752.bin
Downloaded *xeBuild/common/cbb_6753.bin
Downloaded *xeBuild/common/cbb_6754.bin
Downloaded *xeBuild/common/cbb_7377.bin
Downloaded *xeBuild/common/cbb_7378.bin
Downloaded *xeBuild/common/cbb_9188.bin
Downloaded *xeBuild/common/cbb_9230.bin
Downloaded *xeBuild/common/cbb_9231.bin
Downloaded *xeBuild/common/cb_1921.bin
Downloaded *xeBuild/common/cb_1922.bin
Downloaded *xeBuild/common/cb_1923.bin
Downloaded *xeBuild/common/cb_1940.bin
Downloaded *xeBuild/common/cb_4558.bin
Downloaded *xeBuild/common/cb_4571.bin
Downloaded *xeBuild/common/cb_4572.bin
Downloaded *xeBuild/common/cb_4578.bin
Downloaded *xeBuild/common/cb_4579.bin
Downloaded *xeBuild/common/cb_5770.bin
Downloaded *xeBuild/common/cb_5771.bin
Downloaded *xeBuild/common/cb_6723.bin
Downloaded *xeBuild/common/cb_6750.bin
Downloaded *xeBuild/common/cb_7373.bin
Downloaded *xeBuild/common/cb_7375.bin
Downloaded *xeBuild/common/cd_12905.bin
Downloaded *xeBuild/common/cd_13180.bin
Downloaded *xeBuild/common/cd_13181.bin
Downloaded *xeBuild/common/cd_1921.bin
Downloaded *xeBuild/common/cd_1925.bin
Downloaded *xeBuild/common/cd_1926.bin
Downloaded *xeBuild/common/cd_1927.bin
Downloaded *xeBuild/common/cd_1928.bin
Downloaded *xeBuild/common/cd_1941.bin
Downloaded *xeBuild/common/cd_1942.bin
Downloaded *xeBuild/common/cd_4558.bin
Downloaded *xeBuild/common/cd_4559.bin
Downloaded *xeBuild/common/cd_4560.bin
Downloaded *xeBuild/common/cd_4561.bin
Downloaded *xeBuild/common/cd_4562.bin
Downloaded *xeBuild/common/cd_4569.bin
Downloaded *xeBuild/common/cd_4574.bin
Downloaded *xeBuild/common/cd_4575.bin
Downloaded *xeBuild/common/cd_4576.bin
Downloaded *xeBuild/common/cd_5770.bin
Downloaded *xeBuild/common/cd_5773.bin
Downloaded *xeBuild/common/cd_5774.bin
Downloaded *xeBuild/common/cd_6723.bin
Downloaded *xeBuild/common/cd_6753.bin
Downloaded *xeBuild/common/cd_6754.bin
Downloaded *xeBuild/common/cd_7377.bin
Downloaded *xeBuild/common/cd_7378.bin
Downloaded *xeBuild/common/cd_8453.bin
Downloaded *xeBuild/common/cd_9230.bin
Downloaded *xeBuild/common/cd_9231.bin
Downloaded *xeBuild/common/cd_9452.bin
Downloaded *xeBuild/common/ce_1888.bin
Downloaded *xeBuild/common/cf_4532.bin
Downloaded *xeBuild/common/cg_4532.bin
Downloaded *xeBuild/common/xenonclatin.xtt
Downloaded *xeBuild/common/xenonjklatin.xtt
Downloaded *xeBuild/common/ximedic.xex
Finished Checking Files
Click to expand...
POST output from J-Runner (either POST_OUT monitor or RATER output):
not sure how to carry that out?
updflash.bin log (if applicable):
Image of R-JTAG board:
IMAG0459.jpg
Images of close-up soldering to motherboard:
IMAG0458.jpg

Description of problem:

As the title suggests I cannot get the xbox to boot into xell. I have read the nand 4 times they all match, it remapped one bad block. I made a xell image and flashed it to the console. Then I installed the R-JTAG and when i turn the console on with eject it just shows 3 rrod. No secondary codes either. Any suggestions? I have even tried the different dip switches as suggested and still nothing im afraid. Can anyone help?
Was the console working before you started: Y
 
Last edited:
H

Hyperion2014

Full Member
Apr 4, 2014
42
0
Utmad said:
The soldering on the post out looks really bad, you have not soldered the jumpers for aud_clamp or anything, you need to complete the R-JTAG template in my sig.
Click to expand...
Have to agree with Utmad also the post out soldering look really bad..
 
T

teozfrank

Senior Member
Jan 2, 2013
115
0
Ireland
www.teozcommunity.com
Utmad said:
The soldering on the post out looks really bad, you have not soldered the jumpers for aud_clamp or anything, you need to complete the R-JTAG template in my sig.
Click to expand...
I thought that was optional? Mine was the standard kit and did not include a wire for that. I need to get a post output from JRunner, how do I go about this?
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
Aud_clamp is optional, but if you are using regular ROL jtag, you need to bridge pads 1 and 2 on the jtag qsb. as for the aud_clamp method, it is pads 1 and 3, and you have to install a piece of wire from the big square pad to the aud_clamp point. Aud_clamp is considered better, because it doesnt cause the ROL to glitch, but I hear it takes away 5.1 surround sound. It is up to u what option you go with, either way the end result should be the same.
 
H

Hyperion2014

Full Member
Apr 4, 2014
42
0
This would have been super easy if you only had updated the console to the latest dash
end use a simple coolruner rev C chip end that was it,
why make your work so hard.
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
Hyperion2014 said:
This would have been super easy if you only had updated the console to the latest dash
end use a simple coolruner rev C chip end that was it,
why make your work so hard.
Click to expand...
Huh? there is no need to update to the latest dash, R-jtag works with 15574+, his problem is with the jtag qsb, and possibly the post qsb(Hard to tell with flux all over it.) Maybe you should do some more reading(RGH2 is very unreliable on falcon motherboards, and hardly works at all, so it would be easier to get R-Jtag to work with a Falcon).
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
john mathews said:
I got to disagree with rgh2 on falcon bootimes for everyone I done has been no more then 30secs with the right set upwith a coolrunner revc
Click to expand...
How much work, and wire rerouting did you have do, before you got these 30sec boot times? I have done it my self, but I spent 4 hours getting decent boot times on 1 falcon with rgh2 before. I dont have that kind of time to waste on 1 console.
 
Utmad

Utmad

VIP Member
Aug 15, 2010
3,304
118
Southampton, UK
gavin_darkglide said:
How much work, and wire rerouting did you have do, before you got these 30sec boot times? I have done it my self, but I spent 4 hours getting decent boot times on 1 falcon with rgh2 before. I dont have that kind of time to waste on 1 console.
Click to expand...
i have to agree with this, if you solder an r-jtag correctly it will boot quckly virtually first time. To get an rgh2 phat cnsole to boot quickly and reliably can take hours of messing.
 
B

briggs01

VIP Member
Feb 17, 2013
1,324
0
Utmad said:
i have to agree with this, if you solder an r-jtag correctly it will boot quckly virtually first time. To get an rgh2 phat cnsole to boot quickly and reliably can take hours of messing.
Click to expand...
i also agree r-jtag is one of the best if its done correctly , and clearly by his pics it isnt , we all have to start somewhere , but again, it helps if they read first , do all they can then ask
 
T

teozfrank

Senior Member
Jan 2, 2013
115
0
Ireland
www.teozcommunity.com
gavin_darkglide said:
Aud_clamp is optional, but if you are using regular ROL jtag, you need to bridge pads 1 and 2 on the jtag qsb. as for the aud_clamp method, it is pads 1 and 3, and you have to install a piece of wire from the big square pad to the aud_clamp point. Aud_clamp is considered better, because it doesnt cause the ROL to glitch, but I hear it takes away 5.1 surround sound. It is up to u what option you go with, either way the end result should be the same.
Click to expand...
Do I need to Install the JTAG wires too like a normal JTAG (two diodes and point soldered). Ill go for the aud_clamp method then, do I need to reflash anything or can I just bridge pads 1 and 3 and solder the wire to the point?

- - - Updated - - -

What would you reccomend I do?

- - - Updated - - -

briggs01 said:
i also agree r-jtag is one of the best if its done correctly , and clearly by his pics it isnt , we all have to start somewhere , but again, it helps if they read first , do all they can then ask
Click to expand...
What would you recommend I do?
 
Slayertex6

Slayertex6

VIP Member
Jan 30, 2011
1,199
0
Galveston, Texas
Just from looking at the pics you posted, you have the qsb soldered as a regular jtag. Adjust the wiring, as Martin recommends in his sticky, and use the aud_clamp option in J-Runner.
 
Utmad

Utmad

VIP Member
Aug 15, 2010
3,304
118
Southampton, UK
teozfrank said:
Do I need to Install the JTAG wires too like a normal JTAG (two diodes and point soldered). Ill go for the aud_clamp method then, do I need to reflash anything or can I just bridge pads 1 and 3 and solder the wire to the point?

- - - Updated - - -

What would you reccomend I do?

- - - Updated - - -



What would you recommend I do?
Click to expand...
You have the QSB's so no you dont have to solder diodes etc, aud_clamp is the best method so bridge 1-3 and find a piece of wire to connect to connect from the pad to Q2N1 right leg as per instructions. Remember you have too create your jtag image with aud_clamp ticked.


aud clamp.jpg
 
Last edited:
You must log in or register to reply here.