GENERAL 3080-335a-b800-0f00-c000-0013

titcave

VIP Member
Sep 14, 2010
182
0
Quebec
Can somebody tell me what this error code mean ? A guy give me an old box with this error 3080-335a-b800-0f00-c000-0013 and drive have been spoofed.

Original : hitachi 47
Replacement : Lite-on 7
Update started with : Gears of wars 3 original disc

Thanks
 

bigO73

VIP Member
Sep 23, 2010
392
0
Tampa Bay, Florida
Try burning update to disk. Was the drive flashed and if so did you return to stock? In your case you would use one of the original fw's that came with the last fw pack.
 

titcave

VIP Member
Sep 14, 2010
182
0
Quebec
Yes but i flash the drive with hitachi or lite-on fw ? because now the drive is spoofed as hitachi 47 but it is a lite-on.

Drive is flashed hitachi ix1.6
 

bigO73

VIP Member
Sep 23, 2010
392
0
Tampa Bay, Florida
Use the liteon and its going to change the drive to 2510c after update. You do have your OFW right? Even if you dont it will change the CFW to the OFW thats supposed to be on the drive. But you always want to have the OFW just in case.
 

titcave

VIP Member
Sep 14, 2010
182
0
Quebec
Phat key don't work. Hitachi mode B don't work. Drive is like bricked, is I erase I loose the key. Maybe old MRA should work ?
 

EVO91

Full Member
Jul 8, 2011
51
0
United Kingdom
Like Johnny said you can't do the update with a spoofed drive so you need to get what ever the original drive was "lite-on" back in.
 

C43Mi57

VIP Member
Jan 22, 2011
293
0
Canada
you need to do the phatkey extract for the liteon to get the key, and then you will need to get Hitachi drive and put firmware and key on that drive.
liteons are hard to brick.... try power cycling the drive a few times while pressing intro
 
Last edited:

titcave

VIP Member
Sep 14, 2010
182
0
Quebec
ok so the only way is to put hitachi drive ... well I think what he gave me isn't too good finally lol

By the way phatkey don't work that why I asked for MRA