LITEON DG-16D4S - SLIM 360 slim mod help

[rineshm]

Hi. im new here and i was browsing the forum and i came across the 360 slim 9504 tutorial..and it says this

NOTE: If you have updated to the dashboard 2.0.13146.0 then your fw version will now be 0272. If you have updated to dashboard version 2.0.13599.0 then your drive is now locked and you need to follow the same procedures as the 0225 and 0401 drives

i just saw in my xbox and its 13599..what should i do
im confused..can i just carry on with the 9504 tutorial or go back and look at the 0401
i dont have Xecuter DG-16D4S Unlocked PCB
do i need one...

 

[RickSizz]

Your drive is now locked, you will need to open it up and determine whether its an MXIC or Winbond chip( or hook it up to JF). Depending on what you have, you will need to unlock it with the current methods. You have a lot of reading ahead of you. Good luck

 

[RROD!]

first you need to open you xbox to see what drive you have and if its a liteon and if its a winbond or mxic ..do you have the tools to flash the drive?

 

[rineshm]

i have jungle flasher and lt 1.9..
im just confused with what tutorial to go with..what do i need to do if its locked?

---------- Post added at 17:05 ---------- Previous post was at 17:04 ----------

how do i check its winbond or mxic? u want me to open up the drive? sorry im noob..

 

[RROD!]

ok so now you need to find out what dvd drive... is the console open yet?

 

[RickSizz]

http://www.team-xecuter.com/forums/forumdisplay.php?f=156

 

[RROD!]

yes you need to open up the dvd drive is the drive a liteon look at the sticker on top the look at then the chip inside
Ricksizz has given you some good links have a look if you still stuck come back

 

[rineshm]

the console wont be open till tomorrow..
i know its 9504 though..im sure about this..but the problem is i have 13599 driver..can i still use the 9504 tutorial to flash or do i have to go the other way?

---------- Post added at 17:17 ---------- Previous post was at 17:11 ----------

one last question..what if it has mxic or winbond..then what?

 

[RROD!]

best you get the drive open then ppl can help you better when we know for sure what drive you have and what tut you need