GENERAL 360E Console Slim Proto v2

[Gabber]

Ok guys, I want to check which things i need to RGH. So i bought x 360 E console.
It is Corona v5 so first of all i will need a postfix adapter, because v5 don't have POST_OUT. How i mentioned, i actually plan to install Slim Proto v2 (think it's best choice). As I heard, I need J-R Programmer v2 to r/w nands. If I'm wrong, please correct me.

1 x Xecuter Corona Postfix Adapter TX
1 x Xecuter Slim Proto v2 TX
1 x Xecuter J-R Programmer v2
€52.22

And one more question, how I can connect J-R Programmer to Slim Proto ?

 

[oO Elite Oo]

Good luck! If your asking these questions then This job isn't for you, Just being honest.

 

[Gabber]

I come to this forum because I want to know how to RGH my console. Please say what is wrong ?

 

[allnighta]

read up about the proto v2 m8 the answer is in the description and no connection on the board sort of says it all

 

[yanivdod]

sorry mate but you need to do some reading
try read the slim proto section or try martins

• RGH 'Roadmap' for Noobies
  ​
  
  

 

[Gabber]

So I have only to install proto v2 and that's it ? No programmer needed ?

 

[Gabber]

sorry mate but you need to do some reading
try read the slim proto section or try martins

• RGH 'Roadmap' for Noobies
  ​

I already read this, I was asking about j-r programmer, it's strange that Slim Proto v2 don't have connection to J-R Programmer v2 so I don't know how to use it.

 

[rjh79]

You only need the jrp to read and write nand, you don't write anything to the proto v2!!!

 

[Gabber]

You only need the jrp to read and write nand, you don't write anything to the proto v2!!!

So what exactly I have to do with jrp and how and where I need to connect it ?

 

[rjh79]

Ok guys, I want to check which things i need to RGH. So i bought x 360 E console.
It is Corona v5 so first of all i will need a postfix adapter, because v5 don't have POST_OUT. How i mentioned, i actually plan to install Slim Proto v2 (think it's best choice). As I heard, I need J-R Programmer v2 to r/w nands. If I'm wrong, please correct me.

1 x Xecuter Corona Postfix Adapter TX
1 x Xecuter Slim Proto v2 TX
1 x Xecuter J-R Programmer v2
€52.22

And one more question, how I can connect J-R Programmer to Slim Proto ?

Also all 360E require postfix as both corona v5-v6 have post missing.

 

[yanivdod]

So what exactly I have to do with jrp and how and where I need to connect it ?

here
http://team-xecuter.com/forums/showthread.php?t=84696

 

[Gabber]

Also all 360E require postfix as both corona v5-v6 have post missing.

I already mentioned it.

 

[rjh79]

So what exactly I have to do with jrp and how and where I need to connect it ?

You need to connect the cables that came with it to the mother board, I think you need to read some more tutorials mate
as this is quite a simple task you can also use the images supplied in j runner to show you where to install.
good luck.

 

[Gabber]

You need to connect the cables that came with it to the mother board, I think you need to read some more tutorials mate
as this is quite a simple task you can also use the images supplied in j runner to show you where to install.
good luck.

Thanks mate !
But how I see, jrp only have these wires:

Do i have to cut one of these ? If yes, which one ?

 

[oO Elite Oo]

Just to let you know Proto comes pre programmed, you program it you will be out of warranty!

 

[Gabber]

I know. I'm interested in jrp connection to the mother board. Do I need to cut end one of these cables and then connect to mother board ?

 

[Martin C]

You need to stop posting questions and read all guides and tutorials. Once you understand what you're doing, these questions will answer themselves.

 

[Gabber]

First of all I need to read nand and then install chip or install chip and read nand ?

 

[scott1503]

First of all I need to read nand and then install chip or install chip and read nand ?

Just follow the tutorial

 

[Gabber]

Just follow the tutorial

Which one ? There are many tuts