HITACHI NON-79 47 Spoofed as 74850c Undo

[Thanet_360s]

Can anyone help on this matter please??? JF log is below. . .

Many thanks,

Nate

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Wed May 02 19:28:54 2012
This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 3 Com Ports.
Found 7 windows drives C: D: E: F: I: O: S:
Found 2 CD/DVD drives D: I:
XECUTER X360USB PRO attached.
Drive is Hitachi.. 78/79
Playing 79Unlock Audio CD
Failed to Play 79Unlock Audio CD
New CD/DVD detected.
Found drive C: - Hard Drive.
Found drive D: - CD/DVD.
Found drive E: - Hard Drive.
Found drive F: - Hard Drive.
Found drive G: - CD/DVD.
Found drive I: - CD/DVD.
Found drive O: - Hard Drive.
Found drive S: - Hard Drive.
No Hitachi drives were found!
Drive is Hitachi.. 78/79
Drive, answers normal Windows Inquiry 12 0 0 0 24 0
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 32 53 - 20 20 20 20 20 20 20 20 DG-16D2S
0020: 37 34 38 35 7485
Mode-B Done!
Found drive C: - Hard Drive.
Found drive D: - CD/DVD.
Found drive E: - Hard Drive.
Found drive F: - Hard Drive.
Found drive I: - CD/DVD.
Found drive O: - Hard Drive.
Found drive S: - Hard Drive.
No Hitachi drives were found!

 

[jsinger47]

I don't see an issue there. Just select the 78/79 button then restore fw.

 

[Thanet_360s]

I don't see an issue there. Just select the 78/79 button then restore fw.

tried that. . . its a 47 rev drive and that is the issue!! :rolleyes2:

cannot USBmodeB and if i put into modeB it disappears and makes my system HANG :facepalm:

running winxp pro x86. . . was running x64 before but had issues with jungleUSB as i was unable to flash sh*tachi drives so changed to 32bit instead

 

[cab0747]

So wait... It is a Lite-On 7485 that is spoofed as a Hitachi 47, but shows up as a 78/79?

Have you tried to manually set Mode-B and then refreshing your drive list?

This is just a suggestions and I have no idea if it will work: Have you tried t Lite-On erase? I assume you have the drive key already.

 

[jsinger47]

your log says its a 78/79, but if you are sure its a 47, just tick the 47 button

i still don't see an issue here

your drive has been assigned a drive letter in windows, and you have RAM upload selected

---------- Post added at 15:39 ---------- Previous post was at 15:38 ----------

also, you shouldn't ever lite-on erase a drive that isn't a phat lite-on....

 

[Thanet_360s]

your log says its a 78/79, but if you are sure its a 47, just tick the 47 button

i still don't see an issue here

your drive has been assigned a drive letter in windows, and you have RAM upload selected

---------- Post added at 15:39 ---------- Previous post was at 15:38 ----------

also, you shouldn't ever lite-on erase a drive that isn't a phat lite-on....

thanks for your response joe. . . i am just going to screen capture what happens with my JF when i select the correct revision for the drive. . . i know for sure it is a 47 as i took it out of an unopened xenon and put in it my falcon about a year ago as a temp measure but now i have a replacement liteon, i wanted to put this drive back in the xenon so i can sell it.

 

[Oggy]

Check the pcb for epoxy.

I assume you were either already in modeb before connecting the drive? Or you used open tray?

Clarifying more details might help

 

[Thanet_360s]

Check the pcb for epoxy.

I assume you were either already in modeb before connecting the drive? Or you used open tray?

Clarifying more details might help

didnt use either Oggy, Have flashed these drives before with no issues. . only this spoof is being a total cnut!