LITEON 9504 9504 flashed now disk not spinning

[guestie]

Hi guys flashed a 9504 to 0272 3.0lt all went well but now drive wont spin up any ideas plz



:facepalm:

 

[Martin C]

I deleted that massive log.

Follow the JF tutorial ONCE and then post the log once it's done. No telling what you did there, you were saving the destination firmware and everything.

Also tick the box in JF for dummy.bin only.

 

[guestie]

Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

 

[guestie]

JungleFlasher 0.1.94 Beta (320)
Session Started Tue May 28 19:46:29 2013

This is a Wow 64 process running on 4 x 64 bit CPUs
X360USB PRO detected, Version 0.20

Found 1 I/O Ports.
Found 2 Com Ports.
Found 9 windows drives C: D: E: F: G: H: I: K: L:
Found 2 CD/DVD drives E: G: H:

Loading firmware file F:\xbox soft\JungleFlasher\firmware\Caitlins slim\Dummy.bin
MD5 hash: da579d6aab0153a9b306259a3887ab27
Inquiry string found
Identify string found
Drive key @ 0xA030 8873A48AE6C28C2F7598D05E553A65E7
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Auto-Loading firmware file F:\xbox soft\JungleFlasher\firmware\LTPlus-0272-v3.0.bin
MD5 hash: 76b991307ddd5b2af581d0608e671b36
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Drive is Slim Lite-On..

Key found in KeyDB at record (2 - Caitlins slim)
Key is: 8873A48AE6C28C2F7598D05E553A65E7
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
..........................................
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 5196mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorised !
................
Restore verified OK !
Drive is Slim Lite-On..

Key found in KeyDB at record (2 - Caitlins slim)
Key is: 8873A48AE6C28C2F7598D05E553A65E7
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
....................
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..

Key found in KeyDB at record (2 - Caitlins slim)
Key is: 8873A48AE6C28C2F7598D05E553A65E7
Key has been tested and verified, thanks C4eva !

 

[DarthItachiX]

http://team-xecuter.com/forums/showthread.php/136036-0272-kamakazi-flash-problem?p=923207#post923207

Already in another post. You were told that it's a bad kamikaze. Buy a Replacement Board