A FRAG problem......

[Techbridge]

Okey here we go, i soldered on the pin header, lpcrebuild, ++ but it din't work, so checked the solders, could't see anything wrong. I unsoldered all of the connections but by xbox still ain't work (except the pinheader cause i couldened handle that, i have used a magnify at it, that can't be the thing that is wrong ). Im getting a frag or what it is called. Its turning on for a sec. it lights green, turns off for a sec. turns on for a sec. and lights green, turns off, than it turn on again, the light swithes between red and green. This happends BOTH with or without x3. Is there still any change to get it work.

Question: My XBOX Flashes Red and Green (FRAGs), what do I do?
Answer:

This question is asked so many times that I am surprised it hasn't been printed on a t-shirt, because the solution is simple. CHECK YOUR SOLDERING.

Well, the thing is i have disconnected all "new" soldering.......'

edit: btw im having a black xbox v.1.6 and used a lpc-rebuild.

 

[kinghost1]

Yup im having they same stupid problem....Got the PCB installed and soldered over and checked everything....FRAG!!! But i get two blue leds showing on x3....PLEASE SOMONE HELp! Do i need to wire the Lad's the old way>>???

 

[DManAxe]

i need some help plz

ok i have a xbox 360 flash with LT 1.1 drive 83850c but my keys got lost what can i do to get them back??

 

[ReMix]

Re: i need some help plz

are they on the drive?

if so, you have to MRA hack

if they are not on the drive, you have to JTAG

if you can't JTAG, you are out of luck

 

[ReMix]

Re: i need some help plz

also, if your key is verified in JF, try the "dummy from ixtreme" button

 

[DManAxe]

Re: i need some help plz

also, if your key is verified in JF, try the "dummy from ixtreme" button

what button is that?

 

[DManAxe]

Re: i need some help plz

also, if your key is verified in JF, try the "dummy from ixtreme" button

what button is that? plus its not a jtag i just have a modded drive thats all

 

[ReMix]

Re: i need some help plz

i never said you were dealing with a JTAG

if your drive doesn't contain your key, then your only hope of getting it back is to JTAG

look for the button that says "dummy from ixtreme" in the dvdkey32 tab

 

[DManAxe]

Re: i need some help plz

ok i will try thanks man

 

[yaq15]

Re: i need some help plz

sh*t rob did u lost all your files after u flash it r utrying to flash it back to original cause of the rumors saying banned wagon on its way out before black ops

 

[DManAxe]

Re: i need some help plz

no im good man i just lost my drive keys thats whymy original firmware

 

[DManAxe]

Re: i need some help plz

ok when i hit dummy from ixtreme it tell me too move trey to halfway open i do and it says the same thing i need some more info plz i need help

 

[ReMix]

Re: i need some help plz

looks like that only works for ixtreme 1.61 or lower

sorry, but you will HAVE to do the MRA hack to get your keys

 

[DManAxe]

Re: i need some help plz

looks like that only works for ixtreme 1.61 or lower

sorry, but you will HAVE to do the MRA hack to get your keys

not smart enought to know how to do the mra hack im old school i would prouble break the drive i guees ill just have to get banned when the time comes. man f**k this f**king BLOWS!!!!!!!!!!!!!!!!!+