LITEON 74850 Accendently used wrong dummy.bin file

[hades420]

I went to flash my lite on 74850c to the new lt 1.9 firmware cause I was on Lt 1.1 and instead of extracting the dvd key again I thought I used my original dummy.bin key but it was actually the wrong one becasue now I only get the play dvd for all my games real or copied the only thing the xbox plays now is movies I've already tried writing new firmware on it and the original firmware (downloaded), and back to lt 1.1 JF always says succesfull but nothing ever works except movies PLZ PLZ help I'm sure it's something stupid that can be fixed I've tried reading every forum to figure it out and I still can't I even checked my pot tweaks on the laser and there fine to

 

[BL4K3Y]

Check your JungleFlasher key database. To do this, load JungleFlasher, click FirmwareTool32 and then click Open KeyDb. Why are you flashing LT 1.91? LT 2.0 has since been released for Lite-On drives so flash that instead.

 

[hades420]

thanks I wasn't sure if 2.0 was out yet I downloaded Latest_iXtreme_and_Stock_Firmware_Pack and I didn't see the 2.0 for the lite-on I'll check it again does it matter if I used the wrong dummy file first though or I can just keep writing over it and it should be fine

 

[BL4K3Y]

Get the latest firmware pack from the "usual" places. You need the original dummy.bin/drive key that matches your console. Like I said, check the JungleFlasher Key database, see if it's in there.

 

[hades420]

or should I use my probe again and extract the key

 

[BL4K3Y]

That won't work, it will only give you the drive key that was in the "wrong" dummy.bin.

 

[hades420]

I have 4 different keys in there I do I know which one is for mine sorry if theses are dumb questions

 

[BL4K3Y]

Is each key from a Lite-On drive? If so, it's a matter of trial and error i'm afraid.

 

[Fisticuffs]

Open the key db in jungleflasher and look at the job name and see if that helps you remember

 

[hades420]

and what if none of those four belong to my xbox they belong to other ones I've done I've reformated my computer a couple of times since I've done mine

 

[BL4K3Y]

Then I would say the reset glitch is your only saviour, it is the only way to get your drive key back if you don't have a backup of dummy.bin or at the very least, your drive key.

 

[hades420]

how do you do the reset glitch or can you give a link I think that's what I'm gonna have to do I'm trying out the last key right now and I'm slowly loosing hope thanks for the help guys and the quick responses

---------- Post added at 15:11 ---------- Previous post was at 15:01 ----------

Key found in KeyDB at record (7 - LiteOn_Post_13141)
Key is: 4F1A7AB9A1C0657AD57E190883E1F537
Key has been tested and verified, thanks C4eva !
Loading firmware file C:\Users\Hades\Downloads\LTPlus-025-v2.0\LTPlus-025-v2.0.bin
MD5 hash: 0264149996f783b54629c1598072e50e
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: LT-Plus 1.1
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches

Target rev is LT 02510C, serial info not copied

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x0
....
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Lite-On..

Key found in KeyDB at record (7 - LiteOn_Post_13141)
Key is: 4F1A7AB9A1C0657AD57E190883E1F537
Key has been tested and verified, thanks C4eva !

 

[BL4K3Y]

The procedure is correct, however it's whether or not the key is matched to your console.

 

[hades420]

can't I use one of the original keys that came with the download

 

[BL4K3Y]

No, the drive key you use has to be the one that is matched with your console.

 

[capsone]

nope as u were allready told if u dont have ur key reset glitch is ur ONLY option

 

[hades420]

would JF say the dvd key is verified if I was using the wrong one because it does say verified and it's colored in yellow

---------- Post added at 15:20 ---------- Previous post was at 15:19 ----------

and can you tell me what you have to buy for a reset glitch

 

[BL4K3Y]

Have you used the Probe to read dummy.bin from the drive again? If so, this information will now be stored in the database hence why it shows that the key is verified.

 

[hades420]

sh*t your right I did do that

---------- Post added at 15:25 ---------- Previous post was at 15:24 ----------

and for the reset glitch can I just get that coolrunner thing and that's it

 

[BL4K3Y]

You will need the TX CoolRunner (or an alternative) and a JTAG programming cable to program it. You may also need to order a NAND-X in order to read/write your NAND.