after some advice and pos guidance

[geordie nutball]

hi guys i have a cpl questions for you as need some advice.

1. i have an old xenon xbox but no drive and no drive key what do i need to get the key off the motherboard using rgh/rj-tag or what????

2. i have a hdmi console that i read the firmware from the tried to write lt3.0 to it and now all i get is "play game" with no picture in the box, and when i hit start game it kicks me back to dash.........( this one has my head hurting) lol

3. i have a hdmi console with dash 16756 and i am wanting to rgh it what should i / need to get

all i have is firmware reading and writing tools
i have been soldering for years now ever since the days of the psx 6 legged spiders ..............those were the days lol

i have read the noobs guide to rgh / j-tag but not sure still so sorry for the verry noobish questions

cheers

 

[stucknvegas]

1= At this time there is no fix for the old Xenon with no DVD Drive.But dont throw it away yet There are rumors of possible fix with the release of the New Cr4 chip
2= The HDMI machine your attempting 3.0 firmware. Did you see it play games before You started. We need more inpho please
3= You need to I.D. the Motherboard of the machine you are considering RGH-RJTAG on. Personally I would wait for the release of the new CR4 RGH chip for a Phat HDMI console
As a rule of thumb the newer the phat model the better. The new chip will not cover Zepher HDMI machines yet. The new chip should be offered with a Ultimate kit Version witch will include a Jr Programmer V-2 That will read and write to your xbox Nand PS you should read Martins road map for noobs and How to I.D. your motherboard in this forum I hope this Helps you out

 

[Utmad]

CR4 is only for Falcons upwards.

 

[ibzconsolemods]

1= At this time there is no fix for the old Xenon with no DVD Drive.But dont throw it away yet There are rumors of possible fix with the release of the New Cr4 chip
2= The HDMI machine your attempting 3.0 firmware. Did you see it play games before You started. We need more inpho please
3= You need to I.D. the Motherboard of the machine you are considering RGH-RJTAG on. Personally I would wait for the release of the new CR4 RGH chip for a Phat HDMI console
As a rule of thumb the newer the phat model the better. The new chip will not cover Zepher HDMI machines yet. The new chip should be offered with a Ultimate kit Version witch will include a Jr Programmer V-2 That will read and write to your xbox Nand PS you should read Martins road map for noobs and How to I.D. your motherboard in this forum I hope this Helps you out

2: It could be that the lens isn't working anymore because lt 3.0 firmware. I flashed some consoles with that same issue and had to replace or tweak the lens itself.

 

[geordie nutball]

thanks for the replies so far guys.

i have tried the firmware on several different benq drives including 2 new one but all give the same results.

i will re-read the noob tut that was mentioned and thanx.

if the new cr4 is only for falcom motherboards and newer is there any point in waiting as these xboxes are all 2008 boxes with latest dash.

new one for you guys is the demon still an option as i like the idea of going online still with my profile with official dash on one nand and say fsd on the other.


cheers and i think i like this site as no bull just help.

ps. the drive was working before flashing.

 

[alexander_1333]

2. i have a hdmi console that i read the firmware from the tried to write lt3.0 to it and now all i get is "play game" with no picture in the box, and when i hit start game it kicks me back to dash.........( this one has my head hurting) lol

Are you sure that you flashed it with the right key?Sounds to me like a wrong dvdkey.Put a XGD2 original game in, and if it says Play DVD the key is wrong.

 

[stucknvegas]

Please post your Jungleflasher logs all of them I think also!! your drive key is wrong !! seen it so many times
Ps I would not consider demond untill You have several RGH mods completed

 

[ibzconsolemods]

thanks for the replies so far guys.

i have tried the firmware on several different benq drives including 2 new one but all give the same results.

i will re-read the noob tut that was mentioned and thanx.

if the new cr4 is only for falcom motherboards and newer is there any point in waiting as these xboxes are all 2008 boxes with latest dash.

new one for you guys is the demon still an option as i like the idea of going online still with my profile with official dash on one nand and say fsd on the other.


cheers and i think i like this site as no bull just help.

ps. the drive was working before flashing.

Yes the demon nand chip is still an option for the cr4 xl chip. I would recommend buying the cr4 xl because tx has most likely stopped production of the R-JTAG, CR3 PRO, And SLIM PROTO V1/V2. I would wait until the CR4 XL comes out. I wouldn't recommend installing a demon nand by yourself unless you are really good at soldering.