Almost ready... just one question

[stigma327]

I used to own an XBox v1.4 w/an xecuter 2.6 pro installed (I did not do it myself). I recently sold it for a number of reasons, the biggest of which being I wanted to delve into the mod scene myself and actually chip a box myself. I have spent the last month reading the forums and tutorials here on this site learning whatever I can and getting myself prepared so I don't have to ask dumb questions. Now I'm all ready to chip the box, yet one dumb question remains unanswered (if it is answered somewhere on this site, then by all means, kick me and point me in the right direction). Is it safe to use a magnetic screwdriver with T10, T15, and T20 bits? Will the magnetism screw up anything that I will be working near? I know this sounds really dumb and obvious, but I couldn't find the answer and I need to know before the attempt is made. Thanks.

 

[mobomelter]

lets put it this way. I've taken my box apart about 20 or 30 times with a magnetic torx driver and everything still boots and works.

 

[tonylott]

Magnetic ones are better as there is less chance of you dropping the screws onto the "delicate bits" of the mobo. There is nothing in the xbox that can be harmed by the magnetism in those tools. By the way, I think you only need Torx 10 and Torx 20 for a standard X3 installation.

 

[stigma327]

Yes, but...

I believe you are correct about the T10 and T20.. but if I am not mistaken, it requires a T15 to swap in a bigger HDD. Correct me if I'm wrong.

 

[nospmohtkcin]

Re: Yes, but...

I believe you are correct about the T10 and T20.. but if I am not mistaken, it requires a T15 to swap in a bigger HDD. Correct me if I'm wrong.

yep your right but like tonylott said only a t10 and t20 is required for a standerd x3 install

 

[tonylott]

Well, I have learned something new too.... Thanks chaps!

 

[slicknissan]

Buffalo, Ny - Xbox 360 Drive Flashing $10/30 - All Drives

Hello everyone! Considering this is my first post as well, I guess I should introduce myself too and about my services. My name is Dan, friends call me Dano. I have been running my xbox flashing service for the past 3 years and 2 years on iOffer. I was probably one of a few trusted sellers on there. They have recently cracked down on all of the flashing services on there and mine took the hit and to avoid any more problems with them, I just decided to go elsewhere. So I am here to offer my services to you.

As a reference, here is a link to my ratings on iOffer. (If this is not allowed, I am sorry and please delete. I read the rules and couldn't find anything about referencing a different website) THIS IS NOT A REFERRAL! Just to show proof of my past experience. Dan0420's Ratings

ok so on to the good stuff....


CURRENT FIRMWARES & PRICING:

Samsung: iXtremeLT v1.0 - $10 + shipping
Hitachi: iXtreme v1.51 - $10 + shipping
BenQ: iXtremeLT v1.2 - $10 + shipping
Lite-On 74850c: iXtremeLT v1.1 - $10/$30** + shipping
Lite-On 83850c-v1: iXtremeLT v1.1 - $10/$30** + shipping
Lite-On 83850c-v2: iXtremeLT v1.1 - $30 + shipping
Lite-On 93450c: iXtremeLT v1. 1 - $30 + shipping

**I will still preform the classic methods if preferred for $10. $30 includes the MRA hack and has the laser calibration data.

SHIPPING PRICES:

Local - Contact Me
DVD Drive only - $10
Entire Console - $15
International Shipping - Contact Me for a Quote.

ALL return shipments are shipped using USPS Priority (2-3 Day), also if you don't want a shipping charge you can include a pre-paid return label of any shipping method you wish. My work turnaround is 1-2 business days depending on the current workload.


PAYMENT OPTIONS:

PayPal
Google Checkout
Amazon Payments
mpayy
Money Order/Check (There will be a delay, to wait for the check to clear)
Cash

CONTACT INFORMATION:

Private Message via this website
Phone/Txt : 443-203-XBOX - Keep in mind I do have another full time job so I can't answer all the time, txt is easier
E-Mail : [email protected]



Thank you for checking out my post! Hope to chat with some of you soon!
-Dan0