GENERAL alt stby clk

[safron.35]

hi ive gone and lost my solder point fitting coolrunner, i have resoldered to alt point . what i need to no is do i have to repair lost point by bridging a wire to back of resistor i can i leave it alone many thanks

 

[Krafter]

If there was any damage done to the original point then yes, it will have to be repaired. The Xbox will not boot unless you do so.

 

[ball00]

Does the box power on? Think you'll have to upload some photos buddy.

 

[x360ccm]

good clear photos is what is a must have here.

 

[safron.35]

no doesnt power on totally messed it up the resistor has unsoldered as well just going to get a rope

 

[Krafter]

There's a chance it can be fixed but you probably should send it to someone that can replace the resistor and repair the trace if damaged.

 

[safron.35]

hi managed to repair and bridge with wire only problem is green power light comes on xbox but will not boot up cant find problem please help

 

[safron.35]

also i am not getting the glitch green flash after i dissconnect nandx from usb flashing before i remove weird ?

 

[x360ccm]

you was ask to post a pic of the point you damaged. make it a good clear one

 

[safron.35]

file:///C:/Users/safron/Desktop/DSCF2829.JPG

---------- Post added at 05:46 ---------- Previous post was at 05:41 ----------

 

[Martin C]

You can attach images to your posts....

 

[safron.35]

how do you upload photo

 

[manwithoutname]

Even though I'd love to have access to your c:/ folder unfortunately we don't. Upload the pictures to somewhere such as photobucket or imageshack.

 

[Krafter]

www.http://photobucket.com/

 

[rdubbs007]

yeah all you have to do is type the BB IMG code in:

looks like:

 

[safron.35]

---------- Post added at 06:31 ---------- Previous post was at 06:28 ----------

---------- Post added at 06:34 ---------- Previous post was at 06:31 ----------

[/IMG]

---------- Post added at 06:34 ---------- Previous post was at 06:34 ----------

at last give me brain freeze

 

[manwithoutname]

I'm sure you need a 33ohm resistor between those two points.

 

[safron.35]

ok no probs ill get one later and fit do i solder it a certain way or can it be any way around thanks

 

[manwithoutname]

It's a resistor, doesn't matter which way you fit it.

 

[Krafter]

Replacing the resistor needs to be done but it wont cure the not booting problem. There is something else going on.

@OP
Can you take clear pictures of the rest of the connections.