Alternate CPU RST point

[joshypoo]

So i read somewhere in a Post here that someone had used a differant CPU RST point on a corona. they had stated that they ( Found the closest VIA and scrapped it for the RST point)

Does anyone recall this or know what i am talking about?
Or does anyone know of any Top side CPU RST points on a corona?

Please and thank in you advance.

 

[gavin_darkglide]

there are a few cpu_rst points on the board, but the one in the guide yeilds the best results. if the pad is burnt, you will need to repair the trace, as the console wont operate with out it.

 

[nofeloniesyet]

the via thier referring to is directly topside from ft3t10,it goes through to a via topside.

 

[joshypoo]

Pad is not burnt. I am not doing a repair i am just experimenting.

 

[nofeloniesyet]

Pad is not burnt. I am not doing a repair i am just experimenting.

thats fine,but if ft3t10 gets fudged it has to be repaired.thats how we found that via was trying to repair ft3t10.c5r11 dont have to be repaired on corona btw if its fudged,just some food for thought on the subject.

 

[joshypoo]

ok thank you. do you know of another point on the topside that is closer to the CPU?

 

[briggs01]

http://www.team-xecuter.com/forums/showthread.php?t=76145&highlight=alt.+CPU_RST

 

[joshypoo]

Did You know that link is for a trinity? i am referring to CPU RST points on a corona.

 

[nofeloniesyet]

u got3 diff points to work from as of now,if you need anymore,go take ur multimeter to the board and find one.