RGH alternate stby_clk

[idrees786]

hi

just need some advice. was wondering whether soldering the coolrunner QSB apart from R4B24( the orange wire), but use alternate stby_clk point( FT2R2) will work. I ask this as i find it difficult to solder R4B24 on the coolrunner QSB, but still want to retain the coolrunner QSB for future use.

thanx

idrees786

 

[KhaineGB]

Yup, it'll work.

Just put some electrical tape under the QSB, or snip the end off (I used tape).

 

[krypt1c]

Yes you can do it that way.

hi

just need some advice. was wondering whether soldering the coolrunner QSB apart from R4B24( the orange wire), but use alternate stby_clk point( FT2R2) will work. I ask this as i find it difficult to solder R4B24 on the coolrunner QSB, but still want to retain the coolrunner QSB for future use.

thanx

idrees786

 

[idrees786]

hi

thanx for ur helps. its greatly appreciated

idrees