Always disc can't read error with XGDA3 Backups

Y

YaPaY

Noob Account
Jan 24, 2012
9
0
Hi Everybody,

2 days ago I bought a new IHAS524-T32B DVDROM. I have Jasper fat LT3.0 FW.

I flashed my dvdrom after that I flashed it with MaxBurner v1.0 according to the tutorial.

I have different 2 xgda3 games. with latest version of imgburn ı burned my images. Before do that with abgx 1,06 I checked topology data. Everything was green.

According to the imgburn "how to burn new xgda3 games" I selected opc option, all dvd medias are mkm003 I wrote them without any problem with 4x. Every single option of tutorials screenshot completely same.

1 first backup verify off/mkm-003/ 4x /opc on =verify passed can't read disc during about %47
2 first backup verify on(passed)/mkm-003/ 4x /opc on=verify passed can't read disc during about %28
3 first backup verify on(passed)/mkm-003/ 4x /opc on=verify passed can't read disc during about %50
4 second backup verify on(I/O %50)//mkm-003/ 2,4x /opc on=verify passed can't read disc during about ~%25

Imageburn log:

Code: 
ATAPI iHAS524   B AL2A (ATA)Current Profile: DVD+R DL


Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,267,024
Size: 8,738,865,152 bytes
Time: 948:15:49 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x, 6x, 8x


DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,133,520
Changeable: No


TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 4267023)
-> LeadOut  (LBA: 4267024)


Disc Control Blocks Information:
ATAPI


Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519


Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519


Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,330,127


Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,330,127


Layer Information:
Layer 0 Sectors: 2,133,520 (50%)
Layer 1 Sectors: 2,133,504 (50%)


Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 3,324 KB/s (2.4x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x)
Descriptor 3...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 8,310 KB/s (6x)
Descriptor 4...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 11,080 KB/s (8x)
What would you suggest me? I'm spending more and more blank dvd.

Thanks
 
B

bittersuit_98

Full Member
Jan 14, 2012
61
0
YaPaY said:
Hi Everybody,

2 days ago I bought a new IHAS524-T32B DVDROM. I have Jasper fat LT3.0 FW.

I flashed my dvdrom after that I flashed it with MaxBurner v1.0 according to the tutorial.

I have different 2 xgda3 games. with latest version of imgburn ı burned my images. Before do that with abgx 1,06 I checked topology data. Everything was green.

According to the imgburn "how to burn new xgda3 games" I selected opc option, all dvd medias are mkm003 I wrote them without any problem with 4x. Every single option of tutorials screenshot completely same.

1 first backup verify off/mkm-003/ 4x /opc on =verify passed can't read disc during about %47
2 first backup verify on(passed)/mkm-003/ 4x /opc on=verify passed can't read disc during about %28
3 first backup verify on(passed)/mkm-003/ 4x /opc on=verify passed can't read disc during about %50
4 second backup verify on(I/O %50)//mkm-003/ 2,4x /opc on=verify passed can't read disc during about ~%25

Imageburn log:

Code: 
ATAPI iHAS524   B AL2A (ATA)Current Profile: DVD+R DL


Disc Information:
Status: Complete
State of Last Session: Complete
Erasable: No
Sessions: 1
Sectors: 4,267,024
Size: 8,738,865,152 bytes
Time: 948:15:49 (MM:SS:FF)
Supported Write Speeds: 2.4x, 4x, 6x, 8x


DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,133,520
Changeable: No


TOC Information:
Session 1... (LBA: 0)
-> Track 01  (Mode 1, LBA: 0 - 4267023)
-> LeadOut  (LBA: 4267024)


Disc Control Blocks Information:
ATAPI


Physical Format Information (ADIP - L0):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519


Physical Format Information (ADIP - L1):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519


Physical Format Information (Last Recorded - L0):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,330,127


Physical Format Information (Last Recorded - L1):
Disc ID: MKM-003-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,591
Last Physical Sector in Layer 0: 2,330,127


Layer Information:
Layer 0 Sectors: 2,133,520 (50%)
Layer 1 Sectors: 2,133,504 (50%)


Performance (Write Speed):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 3,324 KB/s (2.4x)
Descriptor 2...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 5,540 KB/s (4x)
Descriptor 3...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 8,310 KB/s (6x)
Descriptor 4...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 4267023 (0x00411C0F)
-> RS: 8,310 KB/s (6x) - WS: 11,080 KB/s (8x)
What would you suggest me? I'm spending more and more blank dvd.

Thanks
Click to expand...


Man, I think the ihas burner you are using is not supported.
I think it has to be ihas X24 b version....you have a T32B.

This is the drive you need:

http://www.newegg.com/Product/Product.aspx?Item=N82E16827106289
 
K

KILLorBE

Senior Member
Apr 4, 2006
122
28
Them Netherlands
bittersuit_98 said:
Man, I think the ihas burner you are using is not supported.
I think it has to be ihas X24 b version....you have a T32B.
Click to expand...
He does have the right drive, check his log: iHAS524 B.
T32 doesn't mean a thing, same as 19 for a iHAS124-19B doesn't mean a thing.

@ YaPaY: Did you disable BURN Proof in ImgBurn?
 
M

m_ghrimida

Noob Account
Oct 14, 2011
5
0
Tripoli
I have the same drive you have.

OPC=off
SP=on
FHT=on
Clear OPC history in EEPROM utility

6x or 4x depends on your HDD + RAM performances for example DDR3 and i3,5,7 intel processor you wont have a trouble burning at 6x.

My personal advice, never burn less than 4x, 6x worked for me too but the most important thing is turning off OPC , defragment your PC and finally Turn off your antivirus before burning your dvd.
 
Y

YaPaY

Noob Account
Jan 24, 2012
9
0


4x verbatim mkm003 opc disable

during install %48 can't read error

Can somebody comment the graph?

Thanks

---------- Post added at 16:12 ---------- Previous post was at 16:11 ----------
KILLorBE said:
He does have the right drive, check his log: iHAS524 B.
T32 doesn't mean a thing, same as 19 for a iHAS124-19B doesn't mean a thing.

@ YaPaY: Did you disable BURN Proof in ImgBurn?
Click to expand...
no, it's enabled
 
R

RavenPhoenix

Senior Member
Mar 25, 2011
135
0
Sydney OZ
www.consoleme.webs.com
That graph looks terrible.

I'm using the exact same drive and media as you and I'm well within the KProbe standards. I would make sure that you have the following settings:

OPC: No
Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

Also clear your OPC History, defrag your hard drive, make sure no unnecessary processes are running in the back ground and if that still fails then try burning in safe mode.

Please let me know how you go and if possible post your KProbe results after trying what I suggested.
 
DrunkenNinja

DrunkenNinja

VIP Member
Oct 3, 2011
1,048
88
RGH
YaPaY said:
Link To Image

4x verbatim mkm003 opc disable

during install %48 can't read error

Can somebody comment the graph?

Thanks

---------- Post added at 16:12 ---------- Previous post was at 16:11 ----------



no, it's enabled
Click to expand...
It's bad, and my guess is that 48% install mark is the same place on the disc where your graph flares up.

Try some different settings, but be logical also, don't chop and change them, test them properly with a minimum of two discs, you can find a lot of information in my guide:

XGD3 - MKM003 / MKM001 Settings & Burn Guide - Co-written with the author of IMGBURN

The above gives you a huge head start.
 
Y

YaPaY

Noob Account
Jan 24, 2012
9
0
RavenPhoenix said:
That graph looks terrible.

I'm using the exact same drive and media as you and I'm well within the KProbe standards. I would make sure that you have the following settings:

OPC: No
Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

Also clear your OPC History, defrag your hard drive, make sure no unnecessary processes are running in the back ground and if that still fails then try burning in safe mode.

Please let me know how you go and if possible post your KProbe results after trying what I suggested.
Click to expand...
HDD Installation %100 Success :biggrin:



The average values seems ok but I don't understand how around %50 the values so crazy.

Could you please make a comment about that

above settings, close all tasks including AV, 4x mkm003 verbatim made in india
 
D

DUSTYB3N

VIP Member
Jun 17, 2011
462
0
Blackpool UK
YaPaY said:
HDD Installation %100 Success :biggrin:

Link To Image

The average values seems ok but I don't understand how around %50 the values so crazy.

Could you please make a comment about that

above settings, close all tasks including AV, 4x mkm003 verbatim made in india
Click to expand...
Im sure if you read carefully EVERY WHERE on here, every tutorial states uses verbatim made in SINGAPORE!


Sent from my iPad using Keyboard
 
Y

YaPaY

Noob Account
Jan 24, 2012
9
0
@DUSTYB3N

I know mate, but I want to try india verbs. Until now I tried always singapore and successfully burned percent is 2/11. Now with indian is 2/2
 
DrunkenNinja

DrunkenNinja

VIP Member
Oct 3, 2011
1,048
88
RGH
YaPaY said:
@DUSTYB3N

I know mate, but I want to try india verbs. Until now I tried always singapore and successfully burned percent is 2/11. Now with indian is 2/2
Click to expand...
:facepalm: I give up, I really do :facepalm:

:confused: I just told you the disc is junk and you installed it to your HD :confused:

First thing to understand is that you can install anything to your HD "any old junk".

Just cause a game installs to the HD does not mean the data is correct, your Xbox does NOT know what is on the disc you are installing, just that it meets some very basic requirements (data size, layerbreak) etc.

Do yourself a favor, get some Singapore verbs and start again doing the job properly this time.
 
Y

YaPaY

Noob Account
Jan 24, 2012
9
0
It's a successfully burned and installed verb singapore . (2,4x, opc off)

You can see almost same situation here, too.

 
D

DUSTYB3N

VIP Member
Jun 17, 2011
462
0
Blackpool UK
RavenPhoenix said:
That graph looks terrible.

I'm using the exact same drive and media as you and I'm well within the KProbe standards. I would make sure that you have the following settings:

OPC: No
Advanced Settings - Force HT: No, Online HT: No, OverSpeed: No, SmartBurn: Yes

Also clear your OPC History, defrag your hard drive, make sure no unnecessary processes are running in the back ground and if that still fails then try burning in safe mode.
Click to expand...
It seems you have all the help you need but you choose to ignore!


Sent from my iPhone 4S using Keyboard
 
Last edited:
You must log in or register to reply here.