Finally after a patient wait, it's now installed.
I wouldn't have thought it was that easy to install though.
First it took a while to get the old panel off.
Fitting the new one was just as tough with all the extra wires involved.
One of the tiny wires pulled out of the connector that plugs in on the chip causing no text to display (Very tight fitment under there), so I used some tweezers to force it back in, it works that's all care.
Lastly, plugging in a usb keyboard and mouse pushed the whole socket back out of postion, I'll just have to be carefull in future.
Anyway, the whole things done, shook it about a bit to see if I'd disturbed the loose wire and it didn't,so all is well. Thanks Team X!!!
Looked forward to the new case design.
I wouldn't have thought it was that easy to install though.
First it took a while to get the old panel off.
Fitting the new one was just as tough with all the extra wires involved.
One of the tiny wires pulled out of the connector that plugs in on the chip causing no text to display (Very tight fitment under there), so I used some tweezers to force it back in, it works that's all care.
Lastly, plugging in a usb keyboard and mouse pushed the whole socket back out of postion, I'll just have to be carefull in future.
Anyway, the whole things done, shook it about a bit to see if I'd disturbed the loose wire and it didn't,so all is well. Thanks Team X!!!
Looked forward to the new case design.