Any Official TX Wire Guild Install for Demon Corona via QSB?

[thehunter398]

I have looked around and seen some others peoples pictures of there demon on the corona, but nothing official. I like official

Also i have a question. Does it matter what version the corona is? or will the demon points all be the same and in the same spot on the board?

 

[BL4K3Y]

Before asking a question like that, you should first identify which Corona board you have.

Once you have done that, I'm sure you can easily find the information you need.

I understand that you are new to this sort of thing (I saw your video), but the learning process includes reading and absorbing information.

 

[thehunter398]

Before asking a question like that, you should first identify which Corona board you have.

Once you have done that, I'm sure you can easily find the information you need.

I understand that you are new to this sort of thing (I saw your video), but the learning process includes reading and absorbing information.

Thats the thing. I want to buy or try to get a board that is capable of a demon install first before i buy. Im asking questions before i even purchase the console to do it so i dont veer off the right track. I currently have a v1 and doing a v2 tommarrow. Just curious as of which versions are capable and why one is better then another.

I google "Demon Corrona install" and not very much information comes up. Some old spots saying its not out and some saying the guild will come out with the Coolrunner 3. So all the information need is just kind mixed. The ones i did see i didnt see a version on the post.

If you know a thread that could help me out or at least different installs for each version that would answer all questions.

 

[BL4K3Y]

You can install the slim DemoN on v1 and v3 Corona boards because they have a 16MB NAND.

You don't really need a tutorial - the DemoN Corona QSB makes the install a lot easier (and cleaner).

Once you have the QSB in place, you simply install the DemoN like this (thanks to Xecuter for the image) - I'm pretty sure that the wires (STBY 5v, RB, SBR, TX, RX etc are the same as on a Trinity board).

 

[thehunter398]

Also, im pretty sure this is obvious, but only the 16MB versions of coronas can have demon put on them. so i just answer my own question V1 and V3 are the only ones compatible. Are the points for the 2 board in the same location? Example-Where the green wire is soldiered to.

---------- Post added at 00:22 ---------- Previous post was at 00:15 ----------

Ok, i identified where the green wire is going to be soldiered to on the V1, What about the v3? i have never see a v3 board. Same underneath? Green Wire Point in same location as V1?

Should be last question as my understanding is alot better since when i opened this post.

 

[BL4K3Y]

Ok, i identified where the green wire is going to be soldiered to on the V1, What about the v3? i have never see a v3 board. Same underneath? Green Wire Point in same location as V1?

I haven't seen a v3 Corona yet, but I expect that it is the same.

 

[thehunter398]

I haven't seen a v3 Corona yet, but I expect that it is the same.

Ok, i hope so. Thanks for your help once again. Sorry i had a hard time absorbing the 16MB thing. I put it together as soon as you posted it.

 

[BL4K3Y]

Thanks for your help once again. Sorry i had a hard time absorbing the 16MB thing. I put it together as soon as you posted it.

Not to worry.

You will learn soon enough, but I promise you will learn more when you start reading.

How do you think I started out?

I spent hours reading up about this stuff, but I also had guidance from lots of different people on IRC too.

 

[thehunter398]

I was just infracted for not reading -_-
ugh, i try, just some things fly right in front of my face and i dont realize it until an admin chews me out. I do research and use google. With how many threads there are some information just is everywhere and is scattered and is hard to find what exactly your looking for. Any recommendations on reading stuff? Anything better then google and the stickies?

 

[BL4K3Y]

Any recommendations on reading stuff? Anything better then google and the stickies?

To be honest, almost everything you need to know can be found here.

Many guides are posted here on the forum (the correct credits are given if they are linked from an external site).

Many of us have even written our own tutorials.

 

[thehunter398]

To be honest, almost everything you need to know can be found here.

Many guides are posted here on the forum (the correct credits are given if they are linked from an external site).

Many of us have even written our own tutorials.

Very true on that first part. Its just combining the information with the information you already know as well, and from learning from other as you also said. Its just learning plain and simple. This site is the textbook. Its my job to put it together and such. I understand this and will try and do a better job of reading and putting together and reading and putting together. I bet we will talk again soon with this demon install coming up. Wish me luck!
But you answered everything i need to know. Thank you!

 

[BL4K3Y]

Somebody I know put a compilation together consisting of most (if not all) tutorials on this forum.