My slim is stuck in an update loop going from 13599 to 13604 and the drive is dead. I have lite-ofw.bin with my key so i guess i have some hope. But my main point is , can i do anything to get my rgh going as it is driving me insane and i need help.
RGH anything i can do? :/
- Thread starter Chaoticredux
- Start date
An update loop, you didn't take the official update did you?
You need to flash manually with a hacked dash.
You need to flash manually with a hacked dash.
i havent even installed qsb or coolrunner yet, as i dont think i want to dump a broken nand, is there anyway i can rgh?
I've never come across this problem before, but this is what I'd do.
I'd dump the NAND a couple of times and compare to see they were a matching pair, I would then make a retail NAND using multibuilder and flash it to the console. Hopefully this would give me the current working dash and I could get to work glitching my console.
Please wait until somebody confirms this is the correct course of action before you follow my advice though, I have never attempted this myself.
Just seen the above post, I thought you had stock fw on the drive from your first post.
I'd dump the NAND a couple of times and compare to see they were a matching pair, I would then make a retail NAND using multibuilder and flash it to the console. Hopefully this would give me the current working dash and I could get to work glitching my console.
Please wait until somebody confirms this is the correct course of action before you follow my advice though, I have never attempted this myself.
Just seen the above post, I thought you had stock fw on the drive from your first post.
Last edited:
The last time i heard of someone stuck in a loop was from a game update, and to reslove that he flashed to the latest F/W and used to the same game to do the update again and it worked, seen a few threads on hear about it as well, but i dont know if it will work with the usb method. Maybe one of the pros would be able to help.
x360ccm
BANNED
return your drive to stock.
load your dummy into source.
click no to auto load lt plus.
load the Orig-0272 from the Stock firmware folder into target.
click spoof source to target. write to drive.
lock the spi.then outro it.
then pop the usb back in the console and finish the update.
load your dummy into source.
click no to auto load lt plus.
load the Orig-0272 from the Stock firmware folder into target.
click spoof source to target. write to drive.
lock the spi.then outro it.
then pop the usb back in the console and finish the update.
x360ccm
BANNED
missed that part.my bad early morning lol.
hows your drive dead.
you can still rgh it even tho it stuck in the loop.
just read nand a few times.
hows your drive dead.
you can still rgh it even tho it stuck in the loop.
just read nand a few times.
x360ccm
BANNED