AP 25 Challenge - Dash 13599

F

Fanatic1074

Noob Account
Jun 9, 2009
9
0
Hello all

I have a Xenon board with Nand-x USB installed. I have a good copy of my nand but my XVal tells me i have failed the AP25 Challenge.

I have tried several hours of hex editing my nand to be able to clear this check. Im in need of some help figuring out what to change to clear this error.

I have found exploit 360 and it looks like it can create a new Nand with the old nand and the cd key. However it looks like you can no longer pull the cd key after 8741 or something like that.

I have been searching the net for about 3 days and racking my brain looking at this damn nand dump. I can usually figure this crap out but im kind of lost. Any input would be appreciated.

Anyone have any input?
 
A

aarunjon

Full Member
Mar 27, 2010
34
0
It depends if you've been online after being flagged.

I tried to read and repair my nand after getting flagged but the nand was corrupt because I was online at the time.

Also, I heard some people got banned recently for a few days recently then M$ reversed the ban. Seems alot of people got unbanned after being AP25 flagged.

Anyway, this thread http://team-xecuter.com/forums/showthread.php?t=53534

says you can read and write your nand flash on any version which I'm assuming means dashboard version.

There is a software that's recommended, which takes your nand dump and finds a clean "restore point", which you can write back to your xbox in order to remove any flags, provided you haven't already been online.

I'll see if I can find what it was called. :)
 
F

Fanatic1074

Noob Account
Jun 9, 2009
9
0
Thanks for the info but i know that stuff :).

I have dash 13599 as stated in the title, too new of a dash to do anything with apparently.

I tried Nand Healer and findsecdata and they dont help. Just get errors about not being able to find sec data.

As far as being online, no i have not since the ap25 flag.

Unless i missed something in that thread i dont think there is anything there for me.

Thanks guys, anyone else have any other ideas?
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
just to let you know...those methods of unflagging are not guaranteed to work.. but definitely worth a try...even if you haven't been online
 
Fisticuffs

Fisticuffs

VIP Member
Mar 14, 2011
1,316
68
Arizona, US
Last edited:
F

Fanatic1074

Noob Account
Jun 9, 2009
9
0
SexDrugsOverclocking said:
Did you try JTAG Tool's UnBan option? Go to KV Info section, insert a current NAND Dump, enter your CPU Key and hit Get Info, after you have your KV Info successfully the UnBan button will appear, from there you can try to do the unban process.
Click to expand...
I have not JTagged my xbox yet. I dont see the point. I was told that i cannot pull my CPU with the dash that i am currently on. 13599. Is that not true? If so ill Jtag it this weekend and try it.

frazzeld said:
Run findsecdata v0.62 and post the log!

(Keep a copy of your flagged nand )

Another option to try in findsecdata

run cmd: findsecdata.exe nand.bin -osc
Click to expand...
Here is the log.


findsecdata v0.62 2009-12-09 by boby2pc
Controller version 1
Last filetable change: 0x8B
ECC change: 0x8B Filetbl: 0x0062 Secdata: 0x0061 Timestamp: 33766056 2005-11-22
ECC change: 0x8A Filetbl: 0x0060 Secdata: 0x005F Timestamp: 33766043 2005-11-22
ECC change: 0x89 Filetbl: 0x005E Secdata: 0x005D Timestamp: 33766032 2005-11-22
ECC change: 0x88 Filetbl: 0x005C Secdata: 0x005B Timestamp: 33766001 2005-11-22
ECC change: 0x87 Filetbl: 0x005A Secdata: 0x00BC Timestamp: 33766001 2005-11-22
ECC change: 0x7D Filetbl: 0x00BB Secdata: 0x0076 Timestamp: 33766001 2005-11-22
ECC change: 0x7A Filetbl: 0x0075 Secdata: 0x00DA Timestamp: 3E49A826 2011-02-09
Checking secdata:
00DA containts not 0 values above offset 1024 or zeros below 1024 (overwritten)
Searching for recommended
Extracting secdata:
secdata0061.bin
secdata005F.bin
secdata005D.bin
secdata005B.bin
secdata00BC.bin
secdata0076.bin
Extracting filetables:
filetable0062.bin
filetable0060.bin
filetable005E.bin
filetable005C.bin
filetable005A.bin
filetable00BB.bin
Creating patched secdata:
Patchedsecdata0061.bin
Patchedsecdata005F.bin
Patchedsecdata005D.bin
Patchedsecdata005B.bin
Patchedsecdata00BC.bin
Patchedsecdata0076.bin
Creating patched filetables:
Patchedfiletable0062By0062.bin
Patchedfiletable0062By0060.bin
Patchedfiletable0062By005E.bin
Patchedfiletable0062By005C.bin
Patchedfiletable0062By005A.bin
Patchedfiletable0062By00BB.bin
Use:
Old secdata.bin not found. Console might be not banned, already patched or secda
ta.bin overwritten.
Press ENTER

If i run the OSC switch it just outputs the same thing.
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
you might have also read in the tutorials that this might not work on all consoles...just the luck of the draw...sometimes it works, sometimes not...no guarantees... like i posted before!

might have to wait for the reset glitch hack
 
Last edited:
F

Fanatic1074

Noob Account
Jun 9, 2009
9
0
talby71 said:
you might have also read in the tutorials that this might not work on all consoles...just the luck of the draw...sometimes it works, sometimes not...no guarantees... like i posted before!

might have to wait for the reset glitch hack
Click to expand...
Yea i kinda figured that. Believe it or not i have done alot of research before i posted and was posting on here as a last resort that hopefully someone knew a trick.
 
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
i had the same issue November last year , ended up selling the console
was still perfect to play , just unusable online in the end..kept corrupting profiles, etc
 
You must log in or register to reply here.