Are there any tutorials for install the QSB?

[kevdotbadger]

I can't seem to find any, how do I solder this onto the board? Where does it go? I can't find many resources on installing the QSB.

 

[carlos007]

Here http://team-xecuter.com/forums/forumdisplay.php?f=173

If you posted phat or slim motherboard I couldn't gave you a direct link but just read.

 

[n1ght0wl]

lol there here http://www.team-xecuter.com/forums/forumdisplay.php?f=175

 

[peterrepek]

http://www.team-xecuter.com/forums/forumdisplay.php?f=175

 

[PaddyPat]

Skip point B on the QSB and use the alternate point on the underside. That would be my advice.

 

[kevdotbadger]

Skip point B on the QSB and use the alternate point on the underside. That would be my advice.

Please elaborate.

 

[PaddyPat]

I found it tough to properly solder the QSB without bridging any other of the nearby points. There is an alternate point on the underside of the motherboard that is easier to solder to IMO, which can be found here:

http://team-xecuter.com/forums/showthread.php?t=74992

Your soldering skills might be better than mine, though.

You can follow my failing progress in this topic:

http://team-xecuter.com/forums/showthread.php?t=76398

 

[afiser]

this particular post helped me (a first time solder'er after i practiced a bit on a spare circuit board) succesfully install the qsb's and the subsequent wires afterward on my phat console.

http://team-xecuter.com/forums/showpost.php?p=471586&postcount=15

 

[Turdfurgeson82]

Just go here and look at the diagrams http://team-xecuter.com/forums/forumdisplay.php?f=175 take your time and use flux.