autobaud error help tried everything

[windstorm]

when i try to program the nand-x with my ck3 not revd, it does not work, i have tried adding the cable to the ck3, i have tried different clocks(12 and 14.725), i have tried to reinstall the programs, nothing is working, my cable is fine, i have tried to redownload the nand3 file and put it in different locations, what worked for u guys, i have also tried different ports, i have a gigabyte z68x-ud3h-b3

 

[hodgie]

have you checked this out?
http://team-xecuter.com/forums/showthread.php?t=75777

 

[windstorm]

yes sir i have

 

[hodgie]

ok, well that sux! Sorry
i wasnt able to get mine done either, im going to send mine in to Xconsoles to get done. i truely hate to admit defeat, but its apparently over my head. LOL

 

[windstorm]

how much is it

 

[bigO73]

Just got mine back from xconsoles the other day. Turns out it was a faulty nandx and they replaced it and updated for free. Free return shipping also.

 

[windstorm]

well i have had my nand-x for a few months and i didn't get it from xconsoles, i got from modchip.ca, can i still send it in, my nand-x can read nands and everything, i have used like 4-5 times, without problems, u think it is maybe windows 7

 

[hodgie]

It normally costs $10. considering what this tool is capable of, i say its a worthy investment!

 

[windstorm]

u think i should get the usb to nand-x updater or just send it in

 

[jcandel101]

I was going thru same problems with mine... Ordered the USB to Nand-X cable and got it resolve. It may come handy again if need to upgrade in the future... Good Luck

 

[mark39gold]

having the same problem autobaud failed. i don't have a ck3, i have the usb to nand-x update cable, can you explain how you got the usb to nand-x update cable to work.

 

[windstorm]

well i have ordered a usb to nand-x updater, should be in by tuesday

 

[mark39gold]

---------- Post added at 19:16 ---------- Previous post was at 19:11 ----------

 

[mark39gold]

can you explaine how you got the usb nandx update cable to work.

 

[jcandel101]

can you explaine how you got the usb nandx update cable to work.

Plug USB to NandX cable to computer it will install itself, but you got to install its drivers on Device Manager....
This are the Drivers for Cable

http://team-xecuter.com/forums/showthread.php?t=76276

Once cable its completely installed plug to nandX and follow this tutorial from step #2

http://team-xecuter.com/forums/showthread.php?t=74259

Thats all I did to get it to work.....

 

[mark39gold]

i have tried that thread, but still getting autobaud failed. see it in device manager and says the driver is up to date when usb to nant-x pluged to pc only the red power led lights up guess it may be something wrong with the nand-x.

 

[windstorm]

the nand-x update cable, the usb one, works fine, first try and its is programming