LITEON 83850 v1 Backups and Originals not regonised!

A

Adzme

Junior Member
Sep 11, 2011
12
0
Hi,
Model no: DG-16D2S-09C -- Phat drive
FW Version: 83850C
Updated to Latest Dash
My Xbox was flashed since I bought it, I only played offline. I wanted XGD3 support for my Xbox, so my cousin flashed it from Lt+ V1.2 (or so) to Lt+ V2.0. We didn't have any Dummy.bin or Dvd key or any other files, and for flashing we used a SATA cable not the extra addons you can buy from here. First we flashed to Original firmware, Updated it through XBL to latest Dash, then flashed it to Lt+ V2.0.
Every thing went well, and Xbox starts without problem. But it won't read Backups and not even Originals disks. We flashed it back to Original FW, still no luck.
What should I do? please and thank you!
 
n1ght0wl

n1ght0wl

BANNED
Nov 30, 2011
799
0
London
and you dont have any TX products ? but you want help hmmmmmmm
 
A

Adzme

Junior Member
Sep 11, 2011
12
0
Johnny2good said:
Do you see this part here that you posted >>> We didn't have any Dummy.bin or Dvd key or any other files, thats why nothing plays you flash the drive with no key by the sounds of it and erased the key that was on it id say also.
Click to expand...
I just asked, and he said that we have the Dvd key, but but he doesn't know about the Dummy.bin. So how can I fix my I box I don't mind buying those TX products or sending it to someone experienced.
 
B

BenieUK

Full Member
Mar 25, 2006
50
0
UK
Read your drive again and check if your key is set, if not and you have the key then insert key and flash again to 2.0
 
A

Adzme

Junior Member
Sep 11, 2011
12
0
BenieUK said:
Read your drive again and check if your key is set, if not and you have the key then insert key and flash again to 2.0
Click to expand...
He's tried it a couple of times JungleFlashed shows the key and that's the one he used
 
J2G

J2G

VIP Member
May 13, 2010
3,737
0
90°N
www.esl-communications.com
Try making original fw with your key.bin >>>> Open JF/Firmware Tool/Open Target Firmware/Load orig-02510C-1c000 bin file from your Stock firmware folder/ Click Manual Spoof/ Load Key.bin/ Click OK ...

Then flash the original fw that you just made to your drive and see does one of your originals play before you go any further.
 
  • Like
Reactions: Adzme
A

Adzme

Junior Member
Sep 11, 2011
12
0
Johnny2good said:
Try making original fw with your key.bin >>>> Open JF/Firmware Tool/Open Target Firmware/Load orig-02510C-1c000 bin file from your Stock firmware folder/ Click Manual Spoof/ Load Key.bin/ Click OK ...

Then flash the original fw that you just made to your drive and see does one of your originals play before you go any further.
Click to expand...
:) Thanks for the info, my cousin just left for work so i guess he'll try it tomorrow. Just in case, if that doesn't work, what should we do then?
 
A

Adzme

Junior Member
Sep 11, 2011
12
0
Johnny2good said:
If that doesn't work your using the wrong key.bin buddy if its the right key.bin there is no reason for it not to work only thing then is the lens on the drive is dead and would need replacing that's only if your 100% on the key.bin being right tho
Click to expand...
I'll try it tomorrow and tell you the results then.
Thanks again!
 
You must log in or register to reply here.