Bad Blocks on Stock nanddump

[MrUnknowN64]

So i got bad blocks on a console i was going to RGH but now i don't want to RGH. But i had bad blocks i wrote that nand back and the console wont boot anymore on stock.
LOG

Friday, January 03, 2014 4:31:05 PM

J-Runner v0.3 Beta (4) Started






Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5771
Falcon/Opus
Reading Nand to C:\Users\MrUnknowN\Desktop\Xbox 360 Stuff\J-Runner v02 Beta (290) Core Pack\output\nanddump1.bin
Reading Nand
Error: 250 reading block 27C
Error: 250 reading block 39F
Done!
in 2:50 min:sec


Initializing nanddump1.bin..
Reading Nand to C:\Users\MrUnknowN\Desktop\Xbox 360 Stuff\J-Runner v02 Beta (290) Core Pack\output\nanddump2.bin
Falcon/Opus
Reading Nand
RGH Selected
Nand Initialization Finished
Error: 250 reading block 27C
Error: 250 reading block 39F
Done!
in 2:13 min:sec


Comparing...
Bad Block ID  027C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  039F Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 027C [Offset: 0xA3F800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 039F [Offset: 0xEEFE00]
Bad Blocks Remapped
Bad Block ID  027C Found @ 0x03FF [Offset: 0x107BE00]
Bad Block ID  039F Found @ 0x03FE [Offset: 0x1077C00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 027C [Offset: 0xA3F800]
Block ID 03FE [Offset: 0x1077C00] remapped to Block ID 039F [Offset: 0xEEFE00]
Bad Blocks Remapped
Nands are the same

 

[jsinger47]

Bad blocks are normal. They are not the problem here.

 

[unkn0wn.92]

Bad Blocks Remapped


​jrunner remapped them Bad blocks are normal like stated above

 

[nofeloniesyet]

if you soldered any of the actual glitch chip device headers in,i would def check your stby_clk trace,it would be one of the main causes of no power.

 

[MrUnknowN64]

Bad blocks are normal. They are not the problem here.

So if i write the stock nand it should still boot?

Bad Blocks Remapped


​jrunner remapped them Bad blocks are normal like stated above

The console is still not booting fully to the dashbaord

if you soldered any of the actual glitch chip device headers in,i would def check your stby_clk trace,it would be one of the main causes of no power.

It powers on

 

[unkn0wn.92]

load your nand dump and write it using Advanced > DemoN/Fusion Write

 

[Martin C]

Take the time to read up on bad blocks:

http://www.free60.org/NAND:Bad_Blocks

You don't need to do anything special. If writing it back in its entirety still won't let the console boot, I suggest actually following the template for providing full pics/logs of what you've already done.