bad cpu key

[seniorcelica]

now what? pls help. and sorry for no pics but i dont think it a soldering issues as everthing works.



Checking Files
Finished Checking Files
Version: 03
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5771
Falcon/Opus
Reading Nand to C:\Users\dave\Desktop\my stuff\J-Runner v02 Beta (286) Core Pack\nanddump1.bin
Reading Nand
Error: 250 reading block 10C
Done!
in 2:08 min:sec


Reading Nand to C:\Users\dave\Desktop\my stuff\J-Runner v02 Beta (286) Core Pack\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
RGH Selected
Nand Initialization Finished
Reading Nand
Error: 250 reading block 10C
Done!
in 2:08 min:sec


Comparing...
Reading Nand to C:\Users\dave\Desktop\my stuff\J-Runner v02 Beta (286) Core Pack\nanddump3.bin
Bad Block ID 010C Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 010C [Offset: 0x451800]
Bad Blocks Remapped
Bad Block ID 010C Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 010C [Offset: 0x451800]
Bad Blocks Remapped
Nands are the same
Reading Nand
Error: 250 reading block 10C
Done!
in 2:07 min:sec


Comparing...
Reading Nand to C:\Users\dave\Desktop\my stuff\J-Runner v02 Beta (286) Core Pack\nanddump4.bin
Bad Block ID 010C Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 010C [Offset: 0x451800]
Bad Blocks Remapped
Bad Block ID 010C Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 010C [Offset: 0x451800]
Bad Blocks Remapped
Nands are the same
Reading Nand
Error: 250 reading block 10C
Done!
in 2:03 min:sec


Comparing...
Bad Block ID 010C Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 010C [Offset: 0x451800]
Bad Blocks Remapped
Bad Block ID 010C Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 010C [Offset: 0x451800]
Bad Blocks Remapped
Nands are the same
* unpacking flash image, ....
Spare Data found, will remove.
Removed
* found decrypted CD
* found XeLL binary, must be linked to 0x1c000000
* we found the following parts:
SMC: 1.6
CB_A: 5771
CB_B: missing
CD (image): 8453
CD (decrypted): 8453
* this image will be valid *only* for: falcon
* patching SMC...
! Warning: can't patch this Falcon type SMC!
* zero-pairing...
* constructing new image...
* encrypting CB...
* encrypting CD...
* base size: 70000
* No separate recovery Xell available!
* Flash Layout:
0x0..0x1FF (0x200 bytes) Header
0x200..0xFFF (0xE00 bytes) Padding
0x1000..0x3FFF (0x3000 bytes) SMC
0x4000..0x7FFF (0x4000 bytes) Keyvault
0x8000..0x1133F (0x9340 bytes) CB_A 5771
0x11340..0x1733F (0x6000 bytes) CD 8453
0x17340..0xBFFFF (0xA8CC0 bytes) Padding
0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
0x100000..0x13FFFF (0x40000 bytes) Xell (main)
* Encoding ECC...Done!
------------- Written into J-Runner v02 Beta (286) Core Pack\image_00000000.ecc


Version: 03
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:10 min:sec


Wrong cpukey
Bad CPU Key

 

[Utmad]

All you have done is read the nand, created an ecc. You have not written anything to the nand yet to get xell to boot to get your cpu key. You hqve to supply pictures for support as you may have soldered to incorrect points etc so complete the template in my sig please.

have you wired it correctly for rgh1 ? What glitch chip have you got etc etc...

 

[seniorcelica]

All you have done is read the nand, created an ecc. You have not written anything to the nand yet to get xell to boot to get your cpu key. You hqve to supply pictures for support as you may have soldered to incorrect points etc so complete the template in my sig please.

have you wired it correctly for rgh1 ? What glitch chip have you got etc etc...

its booting to xell and using rev c i enter cpu key manually and yes its correct as i have checked multiple time, and i cant do it through jrunner because i removes the ethernet connecton to build a bartop arcade, thought this box was beyond repair.

 

[seniorcelica]

ok so i am one of the smart ones i guess kept the old cpu keys in the jr data base !!!! up and running smoothy except the debug light only flashes once and stops. i have to reboot sometimes twice then it boots... and just got to figure out how to get away from the 12 v fan mod.

 

[Krafter]

Try rerouting your CPU_Reset wire. A Falcon on that CB should only take one cycle to glitch. Interference from the coils on the board will cause problems. Be sure to stay away from those.

Also, look into editing the temps in the SMC config instead if doing a 12V fan mod.

 

[seniorcelica]

Try rerouting your CPU_Reset wire. A Falcon on that CB should only take one cycle to glitch. Interference from the coils on the board will cause problems. Be sure to stay away from those.

got it, changed from sheilded to slim blue and instant boot, now to put the custom TX case back together and will post a pic of it for you , thanks again.

 

[seniorcelica]

another thing that was wierd was the cpu key was the same on data base as the one i had entered......
[video]http://s1065.photobucket.com/user/seniorcelica/media/DSCF2949_zps155f8aa2.mp4.html[/video]