I just tried to flash a friends 74850c and got stuck on writing bank 0.. because i used jungleflasher 185. The drive will not eject and i cannot get it into vendor mode with liteon erase, i just get status 0x7F. please help
LITEON 74850 Bad flash and need help recovering
- Thread starter ahmbasketball
- Start date
There is a known bug in jf 0.1.85 so try JF 0.1.84.....
If you can't sort it with JF 0.1.84 ome back and list the tools you are using along with your JF Log.....
If you can't sort it with JF 0.1.84 ome back and list the tools you are using along with your JF Log.....
With the 13146 dash the drive changes from 74850C to a 02510C......
If this is the case and you have the 'dummy.bin' then follow this tutorial :-
http://www.team-xecuter.com/forums/showthread.php?t=66301
If this is the case and you have the 'dummy.bin' then follow this tutorial :-
http://www.team-xecuter.com/forums/showthread.php?t=66301
If You Have A Probe v3..! Use This To get It Erase & Reflash..!
Start Jungle Flasher 184
Plug In Drive
Power On CK3 With Blue Light
Hit Device Intro
Place Probe On MPX01 Point & Hit The Button For A Second
(You Should See Your Status Change) Maybe 0xd2 or 0x52 or 0xd0
dont worry if you still cant see your drive..!
now hit l-o-erase in jungle flasher..!
when it says power off hit the probe button again and it should go to status 0x72 which u can erase and re-write if it doesnt work straight away persevere..! try powering off the ck3 before you hit the button..! i sometimes got the flash but didnt have all the details of the flash device id..!
Start Jungle Flasher 184
Plug In Drive
Power On CK3 With Blue Light
Hit Device Intro
Place Probe On MPX01 Point & Hit The Button For A Second
(You Should See Your Status Change) Maybe 0xd2 or 0x52 or 0xd0
dont worry if you still cant see your drive..!
now hit l-o-erase in jungle flasher..!
when it says power off hit the probe button again and it should go to status 0x72 which u can erase and re-write if it doesnt work straight away persevere..! try powering off the ck3 before you hit the button..! i sometimes got the flash but didnt have all the details of the flash device id..!
