JTAG bad flash now error e79..please help?

[garry_b]

hi i was trying to flash my 360 using dis guide to upgrade my 360 using this tutorial:-

hxx://digiex.net/guides-reviews/console-guides/xbox-360-guides/7292-easily-update-your-jtagged-xbox-360-kernel-dashboard-12611-fbbuild-0-11-a-4.html

i followed the tutorial word to word.but nowafter flashing my 360 iam getting error e79 while suing flash360 i actually backed up my nand so how can i restore my nand to how it was please help?:-(

and i do have nand x installed.

EDIT

my 360 was jtagged and was working fine since a long time but i just wanted to update my machine.

 

[garageinc]

just use jtag tool to flash back the nand backup through the nand x if you still have it installed.

it will help if you can say what board it is and how the jtag is wired in for further help mate.

 

[Martin C]

Wait up - you follow someone else's crappy tutorial then come here asking for help?

Where's the point in that???

It's so easy to update the Dashboard now. I use Bestbig's Freeboot builder. All you need is the CPU key and your original NAND dump.

Go post on their forum and ask for help there - they'll be best positioned to assist you.

 

[garry_b]

Wait up - you follow someone else's crappy tutorial then come here asking for help?

Where's the point in that???

It's so easy to update the Dashboard now. I use Bestbig's Freeboot builder. All you need is the CPU key and your original NAND dump.

Go post on their forum and ask for help there - they'll be best positioned to assist you.

i knew i was going to be flamed but i just wanted to update my tutotorial i didnt find any sticky in here saying update your jtag 360 i agree my fault but let me say im sorry for following someone else tutorial. let me give it a try and ill post some photos in a moment.

 

[garageinc]

follow this guide its up to date http://www.team-xecuter.com/forums/showthread.php?t=58111

 

[garry_b]

how do i find out which motherboard i have jasper 256 o 512 or any bor¡ard?

 

[garageinc]

check the size of you original nand dump, i'm a bit new to this myself but there are tools to chwck it too i'm just not sure of the names now. a good look at the homebrew and nandx stickies will tell you though

 

[garry_b]

i have been searching since the past 30 mins no luck only program was 360flash but that would work if my machine did not have error e79 :-( please do help??

 

[playingmax]

what is the sz of ur nand dump? that should tell you what you have.

 

[garageinc]

look at your nand dump in windows it will tell you the size of it that will tell you if its 256 or 512 then just follow the jtag tool guide i gave you earlier and insert your nand and settings in and it will give you the new freeboot image to flash to the xbox.

 

[garry_b]

the size of my dump is 540.628 mb
or
528mb

 

[garageinc]

thats a 512 jasper then. i have several xenon 16mb nand that shows as 16.5 in windows and a zephyr that is the same, no jaspers but its 512 on your's from what you said. as long as you have your original nand it should be easy to sort out with johnny's guide but you will need to know if the jtag is wired to the audio clamp and open tray wiring or db1f1 and the rol to input the correct smc setting in jtag tool.
someone please correct me if i'm wrong like i said this is new territory for me still.

 

[garry_b]

ok now i have a bit of a problem the nand which i had dumped before flashing was 528mb ok but now i was jsut ahving a look at my original nand which i had from when i first jtagged my 360 and turns out thats 264mb.so now im totally confused :-(

 

[J2G]

i knew i was going to be flamed but i just wanted to update my tutotorial i didnt find any sticky in here saying update your jtag 360 i agree my fault but let me say im sorry for following someone else tutorial. let me give it a try and ill post some photos in a moment.

you couldn't find a tutorial anywhere here on how to update your Jtag to new dash you didn't look much then look in my Sig below...

 

[Martin C]

i knew i was going to be flamed but i just wanted to update my tutotorial i didnt find any sticky in here saying update your jtag 360 i agree my fault but let me say im sorry for following someone else tutorial. let me give it a try and ill post some photos in a moment.

I'm not flaming, just stating a fact here. Go post on their forums as it's their tutorial!

you couldn't find a tutorial anywhere here on how to update your Jtag to new dash you didn't look much then look in my Sig below...

He doesn't need assistance on flashing it, surely? After all, he's got a NAND-X installed...

 

[garry_b]

ok guys i agree my mistake but please do answer my last question?

 

[Martin C]

You're telling us NOTHING about the situation you're in.

What did you use to dump the original NAND? What program are you using?

Did you get any errors?

 

[J2G]

i didnt find any sticky in here saying update your jtag 360

Heeemm must be reading wrong lol

 

[garry_b]

i didnt jtag my 360 got it done from someone else
at the end he gave a dvd with my nand and cpy key and few other files on it and that dvd hadmy complete nand which is 264mb. and den when i dumped my nand from flash 360 it gave me a nand dump of 528mb

 

[Martin C]

But you've been using your console between these times - what space was available on the internal memory? Better still, the NAND itself has an ID which will tell you what size it is.