bad flashed sammy

[Stream420]

sammy ms25 hangs when trying to reflash saying:
port: a000, Master/Slave: a0

when i escape
Status = 80 shhould be 70

any help appreciated...

Using Via 6421a and xtreme boot (i think its called) wont recognise drive using normal mtkflash....

 

[lang]

- Are you doing the ms28 bad flash method?

- You say normal mtkflash...did you let XBM hex-edit it for you?

- Are you using the port on the 6421 card closest to the front of the PC tower?

 

[Stream420]

here goes... i got the drive to read and write using xbm and the 0800 disk. wouldnt work without the disk. flashed with 5.3d and now im getting::: to play this disk put it in an xbox 360 console. tried a couple of disks that work in other consoles.... pulling my hair out now.... anyone help....
not online with console either.....

 

[whtldg]

Well this sounds stupid to most people but i must ask did you copy your console key to the new firmware.

 

[Stream420]

copied the key using kdx1.5 to new firmware and flashed to the drive...
update:::: reflashed the drive with the original hacked firmware and all is well... think its v4.2 tried 5.1 and 5.3 and both give place in 360 console message... anyone any ideas....


thanks for the replies to date... most appreciated...