Bb 512 demon

[TilVl]

Everything is working but retail band isnt. Booting. Is there anything special? Its not erroring or anything. Just turns on black screen. Clutch band off demon glitching and booting. Will post pics asap

Sent from my Nexus 7 using Tapatalk 2

 

[TilVl]

I put on the conversion kit and it didn't boot at all. I updated the demon and it worked afterwards. I just can't get the retail nand to boot

Sent from my Nexus 7 using Tapatalk 2

 

[AllyNerd]

Now you know mr vip your going to be asked for pics/logs

 

[TilVl]

Guy, my stuff will be posted. I had to build a keyboard desk and figured I post real quick to see if anyone had any ideas that I could try in a brief second.

http://s73.photobucket.com/user/lirrachus/library/Jasper 512 Demon?page=1

I turned off the crlite and tried booting stock and got 0022 error. Not sure why cause the nands I backed up are fine. Going to reread them and if nothing try to write it back with my nandx

XBOX360
Hardware : Demon Phat
Firmware : 1.4
Flash ID : 0xDCAD Hynix (512MiB - Big block)
Flash Size : 0x1000 blocks of 0x21000 bytes
Invalid Blocks : 0x2F9 0x530
Writing Nand

 

[Martin C]

All DemoN users should be ensuring they do this:

1. build your image with 'noremap' ticked.
2. Erase the DemoN NAND before writing.
3. Use the Advanced - Write DemoN/Fusion NAND option to write the unmapped image to your DemoN.

 

[TilVl]

I tried that. You gave that advice in another thread.

I am having problems with retail nand.

Sent from my Nexus 7 using Tapatalk 2

 

[Martin C]

Have you written anything to the 360 NAND?

 

[appokruznz1028]

I bet if you turn your coolrunner to program it will work on the stock side , try that I had the same problem with a demon and falcon install that I just did , if so you should try the c option under rgh 2.0 because the option b and the option falcon would not allow me to boot a stock image on my falcon , so if this is a falcon board try to do the coolrunner flash option again and use option c with the coolrunner on and should boot

 

[appokruznz1028]

sorry missed the title of the tread

 

[TilVl]

I bet if you turn your coolrunner to program it will work on the stock side , try that I had the same problem with a demon and falcon install that I just did , if so you should try the c option under rgh 2.0 because the option b and the option falcon would not allow me to boot a stock image on my falcon , so if this is a falcon board try to do the coolrunner flash option again and use option c with the coolrunner on and should boot

Wow. You sir are a gent. Sure enough. I flashed the b one it glitches fast. Switched nands and it booted.

Is there something wrong with the other files?

Sent from my Nexus 7 using Tapatalk 2