BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

[360royalty]

hello
I flashed a benq vad to lt+3.0 then when installed the drive keeps trying to open and close and the green light is flashing on the front of the xbox what do I do?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sun Jul 29 15:16:23 2012

This is a Wow 64 process running on 2 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 2 I/O Ports.
Found 0 Com Ports.
Found 4 windows drives C: D: E: Q:
Found 1 CD/DVD drives D:

XECUTER X360USB PRO attached.

Drive is Benq..
Drive is Benq..
Drive is Benq..

Sending Magic Keys to Drive on port 0x0000
.................................................
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
Serial flash found with Status 0x73

Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................

Dumped in 12610mS

Benq Dump file saved to emilioHalo3Benqtestread.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA020 A1136326D9C67BD69B9BDEC1453D93C1
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: LT-Plus 3.0
Key database updated

Auto-Loading firmware file C:\Users\Owner\Desktop\Xbox 360 Tools\Jungle Flasher Ready To Go\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0442-v3.0.bin
MD5 hash: 8784e0f4ce27941a2a3293c8a5ac85e4
Genuine LT plus v3.0
Inquiry string found
Identify string found
Drive key @ 0xA020 FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches


Loading MTK_Flash source file
Loading firmware file C:\Users\Owner\Documents\emilioHalo3Benq.bin
MD5 hash: 6011d80c567f9cf893839df28954bacf
Inquiry string found
Identify string found
Drive key @ 0xB030 A1136326D9C67BD69B9BDEC1453D93C1
Firmware Osig: [PBDS VAD6038 0442]
Firmware is: Stock

Getting Status from port 0x0000
DVD Key already matches
ID strings already match

Getting Status from port 0x0000
SPi flash found with Status 0x73

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !

Sending Vendor Outro to port 0x0000
Drive is Benq..

 

[Martin C]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

How did you power the drive?

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

x360usb pro v2
molex to 360usb molar to usb cable
Laptop

 

[Martin C]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

Have you tried writing the original NAND dump back ? It might have been a bad write.

 

[BL4K3Y]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

What about the eject button - it isn't getting stuck at all is it (I'm talking about the blue button on the front of the console's board)?

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

the log I posted is of me putting it back to stock firmware. I just put it back to LT.3.0 and it sticks the tray half out when powered off. Light still flashing green

 

[daman10]

Does it eject ok when connected to the computer?

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

nope I think power Is weak it does not eject at all connected to USB power. Trying using the xbox to power it right now. However with the firmware restored to stock same problem.

 

[BL4K3Y]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

nope I think power Is weak it does not eject at all connected to USB power.

That's because USB is only 5v, we need 12v for eject which is what MOLEX gives.

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

could it be a laser problem? because Jungle Flasher Read Writes and Unlocks with no trouble at all

 

[BL4K3Y]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

I very much doubt your laser would cause this - did you check that button on the front of the console?

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

used two different consoles just to see if it was the button. does the same on both consoles

---------- Post added at 15:56 ---------- Previous post was at 15:55 ----------

I also changed the drive belt because it would not open standing up could that be a cause?

 

[Martin C]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

When did you change the drive belt - before or after you had the current problem.

BTW you only need 5v to flash this drive, so the logs etc are all ok.

 

[Dicko316]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

check there is nothing interfering with those metal contacts under the dvd tray in the drive, this can mess with the eject mechanism.

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

I changed the belt before the problem

---------- Post added at 16:39 ---------- Previous post was at 16:29 ----------

when looking at my device manager its reading the x360USB pro as just an xecuter CK3I

 

[wantin2mod]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

check there is nothing interfering with those metal contacts under the dvd tray in the drive, this can mess with the eject mechanism.

I second the idea which d**ko316 has suggested. I was having a heck of a time with a couple consoles which I received to fix and found out they were both assembled with different parts from many consoles. Story found HERE. I went through the same issues you're having according to what you've stated here. Get this, it was also a BenQ drive. :crazy:
Got things straightened out and working like new consoles!

.

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

thank you I will check into it. For now I swapped the drive for another benq. Had a customer I told 2 hours and it took 4 so I just went for the swap. Thank you Everyone

 

[Martin C]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

The issue is probably to do with the drive belt you swapped. If it's not pulling the drive spindles apart it'll just look like it's jamming (tray won't move) and light will flash green on the front of the console.

 

[360royalty]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

tray opens & closes on its on without giving the command. When I power off the console the tray opens and stays open. Screen reads opening then closing. then opening etc....

 

[Martin C]

Re: BenQ Vad Restore to Stock Firmware Drive Opening & Closing Flashing Green Light

So it's getting a mixed signal somewhere. A pic of the drive with the casing off and tray open (top and bottom) would be useful.