Benq

[besty]

Hi all just got Benq fat that am going to flash it never bin opened so it stock dash 2.014699.I got usb pro and molex ,what the best way to flash it just so I get it right thanks all.

 

[sp4rkst4rt3r]

Have a scroll through the forums and you'll find a section dedicated to 'Flashing Benq' drives

You'll need one of the CK3 tools because you don't want to use your console for power

Benq are the simplest of drives to flash IMO

 

[besty]

Ok thanks I have look and I got ck3 tool as well .

 

[sp4rkst4rt3r]

Well you are good to go, d/l JungleFlasher and get the latest LT+v3.0 for your drive and off you go

Don't forget to update to latest dash 14719 before flashing your drive and keep your benq_OFW.bin somewhere safe (email it to yourself) :wink:

 

[besty]

This one banned it only for one my young kids to play on has dash 2.014699.0 kinect loaded to play Kinect games on .

 

[frayed]

if you pay for expenses i would be willing to offer my services to come hang out with you for 5 minutes and click the link to the tutorial section, then click the link to the Benq tutorial

OR

i could open up the jungle flasher tutorial for you and navigate to the proper page for a benq drive

otherwise click the SPOON

 

[BL4K3Y]

There is a tutorial right here on the forum.

 

[Blujay]

the guide sent to you is great. but for more info, read the jungleflasher tutorial. And make sure to save and backup your dummy.bin before you erase your drive.

 

[besty]

I will do does the drive try have to be half open as some say it helps I be doing tomorrow when kids in school thanks .

 

[PiXeLbLuE230]

I use x360pro and ck3 kit and i dont think i have had the drive half open when i have flashed them ..... Has been a long time since doing a Benq

 

[hilly360]

no drive does not need to be open m8.

 

[Martin C]

Just read the tuts - no need for posting anything TBH as all information is in there.