Okay so I got this drive that's been giving me problems all day. I first went to flash it to stock fw and during the process of writing the fw Jungleflasher stopped responding and left my drive in vendor mode. After researching how to fix this problem I finally fixed it by switching to a lower version of jf starting the process over again. Now my problem is that after the whole flashing process my console boots into a black screen with one red light. It boots into xell though and the drive is on stock fw. I misplaced my og fw dump but I still have dvd key.
BenQVAD6038 Problem
- Thread starter IcanRGH
- Start date
It is ALWAYS critical to backup your OFW and DVDKey, I have attached the OFW for you for POST 13141.
Thanks
Thanks
Try Update your dash to the latest on update on stock FW and then flash it to lt 3.0 with latest JF but I'm sure it will mess up your Jtag or RGH Xbox if I'm correct, wait and consult with other before attempting my suggestion?
Thanks but I have already installed that FW once and it still doesn't boot "/
Edit: I just retried it and it gives me an error when I try to write that fw saying "No firmware is loaded" Also I had to manually spoof it.
Last edited:
It's been said millions of times before. Post your jungleflasher log so people can at least see what maybe causing the issue!!
Sent from my iPhone 4S using Keyboard and finger
Sent from my iPhone 4S using Keyboard and finger
I will start the process all over again of going from the fw it has now to the stock fw and post the log.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.82 Beta (234)
Session Started Tue Sep 25 03:01:32 2012
This is a Wow 64 process running on 2 x 64 bit CPUs
X360USB PRO detected, Version 0.18
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 3 I/O Ports.
Found 0 Com Ports.
Found 6 windows drives C: D: E: F: G: Q:
Found 2 CD/DVD drives D: F:
Drive is Benq..
Drive is Benq..
Sending Magic Keys to Drive on port 0x0000
.................................................
Done!
Sending Vendor Intro
Requesting Device ID
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x73
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 8289mS
Benq Dump file saved to BENQ-OFW.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xE030 123
Firmware Osig: [PBDS VAD6038-64930C ]
Firmware is: Stock
Key database updated
Loading MTK_Flash source file
Loading firmware file C:\Users\Brandon\Desktop\orig-04421C-A020.bin
MD5 hash: c06824efcf0ca07dc785a5eb73455258
Inquiry string found
Identify string found
Drive key @ 0x0000 00000000000000000000000000000000
Firmware Osig: []
Firmware is:
DVD Key copied to target
ID strings already match
Getting Status from port 0x0000
This is when I click write and it says there is no loaded firmware.
Last edited:
looking at that log you haven't loaded any firmware
you should have your key as source and the LT3.0 or the stock as target ,
and i think you should be using the latest JF for it to flash properly anyway...too old wont detect the right firmware
maybe a quick read of the JF manual might help too
you should have your key as source and the LT3.0 or the stock as target ,
and i think you should be using the latest JF for it to flash properly anyway...too old wont detect the right firmware
maybe a quick read of the JF manual might help too
Last edited:
I have to use this version because when i use the latest and try to write to it wont write and locks my drive in vendor mode.
UPDATE:
Console now trys to boot and shows xbox starting up with all green lights but right when its about to enter dash it freezes and gets 1 red light with error code e76. Problem is no longer my drive. It is now a problem with my ethernet chip which i noticed is a little slanted and not sitting right since the console was previously reflown by somebody... Problems after problems.
Console now trys to boot and shows xbox starting up with all green lights but right when its about to enter dash it freezes and gets 1 red light with error code e76. Problem is no longer my drive. It is now a problem with my ethernet chip which i noticed is a little slanted and not sitting right since the console was previously reflown by somebody... Problems after problems.
Last edited:
HoggFace
VIP Member
