Big IHAS Burning Problem! XGD3

M

marco12

Senior Member
May 10, 2012
114
0
Hey Guys,

I've been trying to burn some of my XGD3 backups, but all my backups seem to fail the Kprobe test,

So far Ive used Drunken Ninjas settings.

SB=ON
FHT=ON
OS=ON
OHT=OFF

But heres my results in Kprobe. I also cleared my OPC before burn.

http://i.imgbox.com/aadaozdk.png

I have no idea what im doing wrong :(
 
M

marco12

Senior Member
May 10, 2012
114
0
frayed said:
you have only used 1 persons settings?

as you have already been told you will need to experiment to find out what settings work best for you as no ones setup is the same
Click to expand...
Frayed, as of today, Ive tried 5 so far...

R3D at Ixtreme:

EEPROM all ON
IMGBURN Optimal, OPC On

And:

EEPROM all on except OHT

and a bunch of others.

And yes they have to go online.

---------- Post added at 08:06 ---------- Previous post was at 08:05 ----------
DREDBOX said:
Hi

What game are you trying to back up ?

Have you tried burning at 2.5 speed ?
Click to expand...
Forza 4 Bud,

I've got MKM003, Im sure at 2.5 they will burn sh*t.
 
-DoC-

-DoC-

VIP Member
Jul 23, 2004
682
48
US
I've had spools of verbs Singapore that have not burned as well as others.

I've also had mk001 burnt at 4x that work better than mk003 at 4x.





Sent from my DROID RAZR using Tapatalk 2
 
Drastic018

Drastic018

VIP Member
Feb 25, 2011
151
23
Michigan
i have mine setup up with smartburn on online hypertuning on force hyper tuning on and overspeed off and i get great burns everytime now. try them settings and see how it works out for you
 
M

marco12

Senior Member
May 10, 2012
114
0
Drastic018 said:
i have mine setup up with smartburn on online hypertuning on force hyper tuning on and overspeed off and i get great burns everytime now. try them settings and see how it works out for you
Click to expand...
Tried that, horrid burn :( for me.
 
X

xblextreme

try switching your sata to ahic in your system bios if is is not already.
 
S

Skndr

Full Member
Dec 2, 2011
37
0
check that you dont have any smudges in the edge of the disk
i was have same like this problem with 50 spindle of Verbatim 003 and when data reach 50% the pi and pif goes high and after check in internet i see that if there is smudges in the edge of the disk you will get same this result in kprobe so check that your Verbatim its pure and clean and there is nothing like finger print or any scratch on the edge
 
M

marco12

Senior Member
May 10, 2012
114
0
Skndr said:
check that you dont have any smudges in the edge of the disk
i was have same like this problem with 50 spindle of Verbatim 003 and when data reach 50% the pi and pif goes high and after check in internet i see that if there is smudges in the edge of the disk you will get same this result in kprobe so check that your Verbatim its pure and clean and there is nothing like finger print or any scratch on the edge
Click to expand...
Just checked, there are no marks at all.
 
X

xblextreme

i dont have a mac, i had one like 10 years ago now i have a pc when i power it on i just press one of the f keys over and over or hold it so i can boot into the system bios. google it for your mac. once in the system bios change your sata ports to achi, and then exit and let pc boot normally it will install the required drivers and i bet you will have better results. Or try buying a x360usbpro.
 
X

xblextreme

Correction change your sata ports from AHIC to IED.:facepalm:
 
Last edited by a moderator:
You must log in or register to reply here.