Black screen after injecting payload

[leandrir]

Just downloaded the new version of SX OS 2.8 boot.dat, transfered to my SD card and now when i try to inject the payload on TegraRCMGUI it appears this message:
''No RCM device detected
RCM Device detected
Preset "PAYLOAD_FILE" set to : C:\Users\leand\Desktop\payload(1).bin
Invoking TegraRcmSmash.exe with args : "C:\Users\leand\Desktop\payload(1).bin"
TegraRcmSmash (32bit) 1.2.1-3 by rajkosto
Opened USB device path \\?\usb#vid_0955&pid_7321#5&212ac8fc&0&5#{aa0dbd45-3117-f331-5c49-76bf65225042}
RCM Device with id 4083021900000010C095416401101062 initialized successfully!
Uploading payload (mezzo size: 92, user size: 27748, total size: 93964, total padded size: 94208)...
Smashing the stack!
Smashed the stack with a 0x7000 byte SETUP request!
Payload successfully injected''

Then the screen just stays black on my switch. The firmware is not updated, i just downloaded the boot.dat file and updated on my sd card.
Can someone help me please?

 

[mmajunkie77]

The only reason you would get a black screen after injecting any payload is if your console is patched.

 

[leandrir]

The only reason you would get a black screen after injecting any payload is if your console is patched.

It isn't, it was working before i turned it off and tried to patch the boot.dat file

 

[Alchemy.Gaming]

The only reason you would get a black screen after injecting any payload is if your console is patched.

Would it still give you the "successfully injected" message in the log? I've never used it let alone with a patched console

 

[mmajunkie77]

Would it still give you the "successfully injected" message in the log? I've never used it let alone with a patched console

Oh, you're right, I didn't even notice that tbh lol. Long day yesterday, really just read the black screen after injecting payload.

 

[Alchemy.Gaming]

Oh, you're right, I didn't even notice that tbh lol. Long day yesterday, really just read the black screen after injecting payload.

I would have believed you if you said yes haha I wouldn't know

 

[mmajunkie77]

I had somebody yesterday with this exact issue. Turns out it was his SD card causing the issue.

 

[leandrir]

I had somebody yesterday with this exact issue. Turns out it was his SD card causing the issue.

What did you do? I've just formated to fat32 but its still giving me the black screen
I tried to downgrade to a different boot.data version and its still giving me the black screen. Please someone help me, im so sad that i suppostly lost 300 dollars plus the hackable resources

 

[mmajunkie77]

What did you do? I've just formated to fat32 but its still giving me the black screen
I tried to downgrade to a different boot.data version and its still giving me the black screen. Please someone help me, im so sad that i suppostly lost 300 dollars plus the hackable resources

If you're on 8.1.0 firmware, you need that 2.8 boot.dat on there. If you are using TegraRcmGUI, check and make sure that you have the APX drivers installed. Also, try a different USB port, as that tends to be the issue sometimes as well.

 

[leandrir]

If you're on 8.1.0 firmware, you need that 2.8 boot.dat on there. If you are using TegraRcmGUI, check and make sure that you have the APX drivers installed. Also, try a different USB port, as that tends to be the issue sometimes as well.

Man, thank you so much, it was the USB port indeed.

 

[Wawer]

Hello, I bought a console before I checked the serial number if the console can be converted XAJ7000721 System 9.0.1 shows that I have the same problem with loading the load I use for this TegraRcmGUI on Windows 7 the console starts in the RCM program and then loads everything looks good it was sent however, nothing is always showing on the black screen does anyone have any ideas to do this? maybe I am doing something wrong ??

Information from TegraRcmGUI:

RCM device with identifier 80830115000000240027426401101062 successfully initialized!
Sending cargo (mezzo size: 92, user size: 27748, total size: 93964, total filling size: 94208) ...
Destroying the pile!
I crushed the stack with a SETUP request 0x0000 bytes!
The load has been successfully injected