All good suggestions. I think it'll just be a case of troubleshooting and ruling stuff out. Flashing the nand back being a good starting point.
black screen - no video/no sound
- Thread starter FastBroker
- Start date
Yeah you should. It'll help diagnose further. If its still black screen then we'll have to look at other issues.
J2G
VIP Member
For now just rewrite to the nand FastBroker and see will it boot if that fixes the video problem
My xbox360 is new. RROD is impossible, indeed i don't have red light but only 1 led green.
I tried with y+trigger for setting default resolution. The led is now 4(all) green. After restart, led are now all off after have loaded
Resolved
. I reinserted the original nand and the console start normally.
Now freeboot its ok!!
Possible problems could be:
1. I had not injected config.bin
2. The welding on the point was not good on FT1U2 so I used the normal point DB1F1.
3. maybe I touched the NAND with heatsink that was to mass?
Thanks for your fantastic help guys
Last edited:
J2G
VIP Member