LITEON DG-16D4S - SLIM Blown C6 Capacitor and R1 resistor DG 16D 4S

[mantoreilly]

Hi
I'm new to forum , not sure if im posting in the right category. I know this is covering old ground but i somehow managed to plug in, upside down, the power cable to the my dvd drive (dg 16d 4S,0401) and blew the c6 smd capacitor and r1 resistor. I know the value of the capacitor is 100uf, 6v but can anybody give me additional values such as the package case/dimensions ,tolerance and capacitor type. Any help or links to the correct capacitor would be greatly appreciated.
Thanks in advance

 

[nightmare0]

It happened to me once. Luckily didn't burn anything. I would just change burned parts and try. Everytime, you can buy 16D4S replacement PCB

 

[mantoreilly]

I bought a replacement drive (DG 16D 4S, FW 9504) as there were other problems with the my dvd drive (DG 16D 4S FW 0401). When I opened the replacement drive to swap over the PCB and capacitor,the C6 capacitor on the replacement board had different markings (47 10v, maybe 47uf 10v). I can only presume that the C6 capacitor was blown on this board as well and replaced with a capacitor of lesser capacitance. I'm not an expert in electronics by any means but I usually try to swap over like for like. To save me buying another PCB, I would appreciate if somebody could tell me if it would be OK for me to use this capacitor or at least where to find the correct replacement capacitor without having to buy a new PCB.

 

[mantoreilly]

Anybody?

 

[chase]

post pics of both boards pls

 

[mantoreilly]

drive with blown c6 capacitor and R1 Resistor


replacement board,markings on capacitor are 47,10v

I have purchased an SMD with the following specification. I think the package size is slightly big for the job but im hoping it will do.

Capacitance	100µF
Tolerance	±10%
Voltage	6.3 V dc
Mounting Type	Surface Mount
Electrolyte Type	Solid
Package/Case	3528-21
Equivalent Series Resistance	500mΩ
Leakage Current	6 μA
Dimensions	3.5 x 2.8 x 1.9mm
Depth	2.8mm

 

[mantoreilly]

Installed and working.Ill keep the forum posted if it stops working