I have X360 S model 1439, date 18/10/10 with Corona mbo 4GB and Hitachi drive.
I can boot into xell (0.993) but I had to disconnect the dvd drive otherwise couldn't get CPU & DVD key.
I've downloaded dump files and created new nand in J runner (also tried in other program). When done, I've put updflash.bin file on the root of USB and connected it to xbox then booted into xell. Everything went fine except xbox can't recognize any usb I tried...it's searching for the file whole time without success.
what to do?
this is what I got:
==================================
Swizzy's xeBuild GUI version 2.098
Log Started: Monday 5.9.2016. 16:31:45
==================================
*** Some console information ***
CB Version: 0
ERROR: Unable to decrypt KV using specified CPUKey!
This means the log will NOT contain information from your keyvault, it can be caused by etheir badkey or badblock/corrupt keyvault
Using xell-reloaded for Glitch hack
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data directory, this may take a while... Done!
Checking if SMC is Glitch or Retail...
Dumping current SMC... Done!
Checking SMC...
SMC is Glitch patched! it will be used the way it is...
Parameters sent to xeBuild:
-noenter -t glitch2 -c corona4g -d data -f 17502 -b ...................................... -p ............................ output.bin
Building nand using xeBuild (this may take a while):
---------------------------------------------------------------
xeBuild v1.17.785
---------------------------------------------------------------
base path changed to D:\xeBuild_GUI_2.098\files
---- { Image Build Mode } ----
building glitch2 image
done! fsroot found ok!
---------------------------------------------------------------
output.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17502.0
Console : Corona
NAND size : 48MiB MMC (system only)
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : .........
ConsoleId : ..............
MoboSerial: ...............
Mfg Date : 10/17/2011
CPU Key : .............
1BL Key : ...............
DVD Key : ............
CF LDV : 6
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
I can boot into xell (0.993) but I had to disconnect the dvd drive otherwise couldn't get CPU & DVD key.
I've downloaded dump files and created new nand in J runner (also tried in other program). When done, I've put updflash.bin file on the root of USB and connected it to xbox then booted into xell. Everything went fine except xbox can't recognize any usb I tried...it's searching for the file whole time without success.
what to do?
this is what I got:
==================================
Swizzy's xeBuild GUI version 2.098
Log Started: Monday 5.9.2016. 16:31:45
==================================
*** Some console information ***
CB Version: 0
ERROR: Unable to decrypt KV using specified CPUKey!
This means the log will NOT contain information from your keyvault, it can be caused by etheir badkey or badblock/corrupt keyvault
Using xell-reloaded for Glitch hack
Including dashlaunch... Done!
Including custom dashlaunch settings (launch.ini)... Done!
Copying nand to data directory, this may take a while... Done!
Checking if SMC is Glitch or Retail...
Dumping current SMC... Done!
Checking SMC...
SMC is Glitch patched! it will be used the way it is...
Parameters sent to xeBuild:
-noenter -t glitch2 -c corona4g -d data -f 17502 -b ...................................... -p ............................ output.bin
Building nand using xeBuild (this may take a while):
---------------------------------------------------------------
xeBuild v1.17.785
---------------------------------------------------------------
base path changed to D:\xeBuild_GUI_2.098\files
---- { Image Build Mode } ----
building glitch2 image
done! fsroot found ok!
---------------------------------------------------------------
output.bin image built, info:
---------------------------------------------------------------
Kernel : 2.0.17502.0
Console : Corona
NAND size : 48MiB MMC (system only)
Build : Glitch (v2)
Xell : power on console with console eject button
Serial : .........
ConsoleId : ..............
MoboSerial: ...............
Mfg Date : 10/17/2011
CPU Key : .............
1BL Key : ...............
DVD Key : ............
CF LDV : 6
KV type : type2 (hashed - unchecked, master key not available)
---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Last edited:
