[Bricked Jtag] No CPU Key, No Way Of booting into Xell, ETC {HELP Please!}

[Axton]

TX Product(s) used: J-R Programmer v2
Console Type: Xenon
NAND size: Unknown (Bricked)
Dashboard version: Unknown (Bricked)
CB version: ????
Screenshot of NAND details from J-Runner:
(attach an image to your post)
J-Runner log:
updflash.bin log (if applicable): (Bricked)
Images of close-up soldering to motherboard: It was un-soldered and cleaned up. (THIS is a soldered pic, but it WAS REDONE!!!) Also, it responds to J runner program

Description of problem: I don't have CPU Key, or back up nand. (Sync and Eject button are burnt, so that's a no)

Was the console working before you started: No

 

[Martin C]

Is it definitely a JTAG? Where's the proper dump from it?

Why aren't you asking the person who did it?

 

[Krafter]

What do you mean by the eject and sync buttons are soldered?


Tapatalk misspelled it. Knot me.

 

[Axton]

What do you mean by the eject and sync buttons are soldered?


Tapatalk misspelled it. Knot me.

The buttons are melted. Literally melted.

I flashed a bad image. Is there anyway to flash Xell and boot into it by powering it on?

 

[BrockThunderjam]

Can you write the image back that was originally on there? Did you save it somewhere?

 

[Axton]

I did save it, but then i got a email virus, so i had to restore it. All i have is a Nand dump and a flashing device.

 

[Martin C]

I suggest finding someone local to do it. Better still, contact the person who sold it to you.

 

[BrockThunderjam]

By nand dump, do you mean the original nand? This is your original image. Did the console boot before with that image? If so, flash it back. It will write over the "bad image" you created.

 

[Axton]

Why have someone else do it if it's possible to fix. I bought Jr Programmer v2 for this problem... What do you do to customize Xell to boot up when Console Powers on?

- - - Updated - - -

By nand dump, do you mean the original nand? This is your original image. Did the console boot before with that image? If so, flash it back. It will write over the "bad image" you created.

By Nand Dump, I mean Nand Dump. I dumped the nand via Jr Programmer v2...

 

[BrockThunderjam]

By Nand Dump, I mean Nand Dump. I dumped the nand via Jr Programmer v2...

If the console booted before you wrote a "bad image" to it, and you have the original nand dump, then simply write it back.

 

[Axton]

Not sure why you're bringing attitude when I'm trying to help. Either way, if the console booted before you wrote a "bad image" to it, and you have the original nand dump, then simply write it back.

I didn't have an attitude, i'm sorry if that seemed like it. I don't have the Original Nand. I don't have the CPU key. I just have the Jr Programmer v2 chip hooked up. I heard that i can flash Xell to my Jtag with the settings set to Booting into xell via Power on by console and retrieve my CPU key.

 

[Martin C]

Why have someone else do it if it's possible to fix.

Because you lack the ability to read and search.

 

[Antalpromille]

What do you do to customize Xell to boot up when Console Powers on?

Dump whats on your nand and save it, it might be usefull. After that, write xell with smc-config that matches your jtag wiring, what will make xell bolt with power button.

 

[Axton]

I searched for 5 hours yesterday for everything i thought of. I thought you guys would be helpful. I am so frustrated with my Jtag.

- - - Updated - - -

How do i write it to match with my wiring?

 

[Martin C]

You have to tell us what you have.

There's a template in the stickys which you need to fill out.

If you want help you need to ask for it properly:

[h=3]TEMPLATE: RGH/JTAG help[/h]

 

[Axton]

You have to tell us what you have.

There's a template in the stickys which you need to fill out.

If you want help you need to ask for it properly:

TEMPLATE: RGH/JTAG help

Fixed. Hope i can get help now.

 

[BrockThunderjam]

Oh man, that's some pretty bad burns.

 

[Axton]

Oh man, that's some pretty bad burns.

I know right! I bought this from a seller and it was like this. :S I took it off and cleaned it very nicely. It looks a TON better.

 

[Martin C]

So there's no other wiring???

In which case it's not a JTAG.

 

[Axton]

So there's no other wiring???

In which case it's not a JTAG.

There is other wiring. I assumed you just wanted the J-R Programmer v2...

This is a jtag. It just bricked. The Jtag Wiring was not messed with.