LITEON 9504 Bricked Liteon 9504 HELP!!

[sr20sti]

Hi i was flashing the drive using a via 6421 card and ck3 when my pc froze, luckily i got the key. The drive does not eject or anything anymore. Tried unlocking it but it says no drive detected. I tried with tray half open aswell. Please if anyone could help me would be greatly appreciated.

 

[GonyX]

Try intro Device until you get 0x72

 

[sr20sti]

Tried that already. thanks anyways

 

[GonyX]

i dont know if the Liteon Erase works but test that? erase until you get 0x72
Or Test slim key until you get 0x72. You wont get the key but you have it. we want you to get the 0x72 status.

 

[rdubbs007]

Nowhere in the Jungleflasher manual does it tell you to erase your LiteOn 9504.

 

[sr20sti]

Still nothing, it does not detect the drive

 

[GonyX]

LOLz still have the 1.74 JF MANUAL on the 1.81

 

[wynnwillo212]

i had this happen to me the other day

click introdevice but a small box will appear,
click yes,
power cycle the drive by turning the ck3 pro/lite on and off once quickly until you get a 0x72 status {Should come up drive is in vendor mode}
make sure you have the key and firmware part sorted and just click write and you will done

 

[sr20sti]

have been trying that all the time lol, nothing

 

[sr20sti]

status 0xFF then it says resending vendor...........

 

[wynnwillo212]

status 0xFF then it says resending vendor...........

when its resending vendor thats try turning the ck3 pro off and on again quickly.

 

[sr20sti]

tried that as well

 

[tonyintn]

Not sure if this will work but give it a try. Try using the old dosflash method to get in vender mode and flash the cfw. This method always works on the other liteon version when people make a mistake and brick the drives from freezing and what not.

 

[sr20sti]

Tried that, nothing, it does'nt pick up the drive at all.

 

[sr20sti]

okay it says status 0xD0 now and resending vendor intro.............

 

[TitanaMaster]

perhaps a cable trouble or pc trouble in the bios?
i'm certainly NOT an expert... just an idea!

 

[sr20sti]

i doubt it, havent had any problems EVER flashing drives.

 

[ddsdavey]

Mislabelled 0225 perhaps,it does happen and explains th efact you can dump but not write.
Or do you need the USB gadget to even dump the 0225 or just write?
Also was your lot number 104XX by any chance?
I dont see why you think its bricked if you havnt even got it detected to the point that you can write anyways?
Unless you dropped the thing?!

Off topic slightly,ordered my USB,wasnt going to but having done hundreds i can see this being a dream come true for modders!

 

[Ubergeek]

For the record the X360USB PRO badflashes / intros Slim drives easily (its designed that way)

It doesn't work so well with sata chipsets - as you can see from the posts previous to this

 

[santiagojonatha]

friend leaves it to put easy utilisa the tarablinda the command it is the following one

Example: Tarablinda E480 rewrite newfw.bin



Usage: Tarablinda [SATA PORT] |rewrite] [file to flash]


or for two with dosflash 1.9 in the function mentioned anterirmente