Broken Nand-X?

[Stuck Throttle]

I ordered my Nand-X in February. I've only had it 5 months, and it has been very useful in those five months. A week ago I was in the middle of flash Xell to a Xenon and it started to give errors at every block. So I waited and then checked my soldering. I desoldered and resoldered it with no luck. (LPT Cable worked though)

I have tried my Nand-X now on five different boards and get nothing. Is there a way to test if this thing is actually dead? ModChipcentral only warranties for one month so I am out of luck on that. I honestly don't have a problem buying another, but want to be sure that this thing is broke.

Both lights come on. I think nandpro error is Cannot find USB device last time I tried it. I know I saw the cannot find flash controller error also a few times. Anyway, any help would be wonderful.

 

[BGAMods]

check all the connector wires are still firmly in place at both ends.

 

[seanr28]

I' had the same issue, and turned out to be the nandX, there have been a few of these go wrong, I had mine replaced after about 9 months FOC! from ck3 IRRC

 

[Stuck Throttle]

I've checked the wires over and over again at both ends and still nothing. guess I will just order a new one.

 

[M AzeeM K]

1. Try the Nand-X on another PC.

2. Try another USB cable.