GENERAL Building Retail NAND

[GameSysRepair]

So ive never had to build a retail before and didnt really know where to post this at. But had someone bring me a xbox they got off ebay, they tried updating the dash and it wouldnt boot again. I finally have Xell booting but would like to build a retail image to give back with the system. Here is the fuseset:

fuseset 00: c0ffffffffffffff
fuseset 01: 0f0f0f0f0f0ff0f0
fuseset 02: 000f000000000000
fuseset 03: cpu key
fuseset 04: cpu key
fuseset 05: cpu key
fuseset 06: cpu key
fuseset 07: fffff00000000000
fuseset 08: 0000000000000000
fuseset 09: 0000000000000000
fuseset 10: 0000000000000000
fuseset 11: 0000000000000000

 

[jsinger47]

Use Martin's guide for what LDVs you need.

Place decrypted KV you extracted from the console in the xebuild/data as well as a clean SMC from the clean SMC pack.

Select appropriate dashboard and CB, paste CPU key in JR, then advanced/build create image without nanddump.bin

 

[GameSysRepair]

Yea ive tried to do it. Not having no luck, I believe my LDV would be 5 but img on Xbox says 3 in Jrunner. And my dash would be 15572 or higher.

if im reading it all right cseq = 4
and my CB should be 13181 but creating RGH IMG gives me 13121

 

[john mathews]

Yea ive tried to do it. Not having no luck, I believe my LDV would be 5 but img on Xbox says 3 in Jrunner. And my dash would be 15572 or higher.

if im reading it all right cseq = 4
and my CB should be 13181 but creating RGH IMG gives me 13121

u go by what xell says and build it with ldv 5

 

[GameSysRepair]

Retail Selected
CpuKey is Correct
Load Files Initiliazation Finished
16547
Started Creation of the 16547 xebuild image
---------------------------------------------------------------
xeBuild v1.16.728
---------------------------------------------------------------
base path changed to D:\J-Runner\xeBuild
---- { Image Build Mode } ----
building retail image


done! fsroot found ok!


******* ERROR: hacked or unknown SMC binary found? you should use a clean SMC binary for a retail image!






***** FATAL BUILD ERROR: -4 unable to complete NAND image


---------------------------------------------------------------
xeBuild Finished. Have a nice day.
---------------------------------------------------------------
Failed

Thats what i get. And im using the clean SMC from the pack.

 

[jligg]

You need to get a donor and use the clean smc and put it in xebuild/data folder. jsinger as already told you this

 

[jsinger47]

Willing to bet you didn't name it "smc.bin"

 

[GameSysRepair]

no i left it named corona. lmao. yea ive downloaded the clean SMC pack a couple times now and it always comes out to be hacked. I got my corona nand tho and used the SMC from it and that worked, but every dash i have tried has given Red dot. never had so many problems with a system. can get Xell to boot but hacked img is a no go.

 

[Titanfreak736]

yes once you lose the og kv your xbox is a permanent rgh

 

[GameSysRepair]

When these ppl bought it they bought it off ebay. The guy they got it from didnt send the original or anything for the system, the kid tried to update it and then it wouldnt boot. But everything ive tried i cant get it to boot anything but Xell and it boots instant. But no hacked nand will boot. wanting to make sure its still booting original, but if im unable to do that what are my options?