burnt trace, alternate d0?

[bpwax]

After destroying the d0 on the bottom of the board, I have read that you are not supposed to solder to the silver conducting junk that i used to repair the trace. My question is there another d0 that i can solder to?

I tried to solder to the d0 on top of the bored but it wouldn't stick, does that call for removing the flux and then trying again?

thanks to those who help

 

[C0Ld_BuG]

There are two...the one on top...the via...and the point on the bottom of the motherboard.

C0Ld_BuG

 

[bpwax]

and...

how do i go about soldering the top one?...just straight up soldering or is any special prepping needed?

 

[icecreamguys]

how do i go about soldering the top one?...just straight up soldering or is any special prepping needed?

MORE CAREFULLY THAN YOU DID THE BOTTOM ONE

Obviously...

LOL

 

[C0Ld_BuG]

You need to remove the laquer around the point so the solder will make a connection with the point. I used a box cutter to carefully scrape it off. Be very careful.

C0Ld_BuG

 

[DAlbonese]

alternate d0

i am having trouble with my cuz's xbox and was successful with my first 5.....i want to try a alternate d0...where exactly should i solder it?