RGH c15 cap on coolrunner value

[thebomber]

hey guys im soory to ask such a lame question, but this is my last coolrunner, and i was rgh2 a console which took forever to glitch so decided to remove everything till it gets better, the problem is the c15 cap i had removed one leg of it only, now its gone, flying in my room:facepalm:, with what value should i replace it to get this bad boy running again

 

[LoneWolf913]

1nf, believe it's either a 0603 or 0402 SMD cap, my bet is on 0603 sizing but I don't have a CR sitting next to me to check.

 

[thebomber]

same here, hope some one with a spare coolrunner can check and tell:biggrin:

one more thing returned the console to stock, now 0022

what a shame :facepalm:,

this is like my 50th phat, nothing broken nothing wrong

had this problem before and ended up throwing the whole thing in the bin:biggrin:

what could this crazy error be from

 

[LoneWolf913]

same here, hope some one with a spare coolrunner can check and tell:biggrin:

one more thing returned the console to stock, now 0022

what a shame :facepalm:,

this is like my 50th phat, nothing broken nothing wrong

had this problem before and ended up throwing the whole thing in the bin:biggrin:

what could this crazy error be from

Confirmed it's a 1nf 0603 cap. Also, check over all your soldering, I just had a Falcon that went 0022 on stock image and I believe I managed to blow the CPU during my RGH attempt, but that's a whole other can of worms as it was an experimental console.

 

[thebomber]

ok thx alot will install one, one thing any clue why 0022

nothing is wrong with the nand or the wires, i removed everything clean, and it doesnt even look that an rgh was tried on it :crazy: