OK, I was able to retrieve key from xbox w/out drive using rgh 2.0 now I would like to use the CL on a slim. so my question is what can I use to replace the c15 cap I removed?
RGH c15 cap replacement.
- Thread starter playingmax
- Start date
oh, well if you have another one you can measure it and get the same value, and install the cap of the same one, or some one can measure it for you and tell you, i dont have one in my hands now or else i would have told you
If you had to use rgh2.0 you are most likely on the latest dash. So why would you need to replace the cap if it is not needed to do the glitch? Maybe I missed something but I didn't notice anything, anywhere that said to replace the cap?
Never mind! Just realized that you doing this on a diff console. My bad
Last edited:
Utmad
VIP Member
Sorry this ain't much help but I just unsolderd one end of mine and bent it up so it doesn't make contact then I can just resolder the one end to put it back to normal
rs250
Full Member
If someone can measure the c15 cap or knows the value it would be great. I had it saved, but I cannot find it at the moment to measure. PM it if you do not want to list it publically.
Found it but was not able to get a definitive answer on what value it is... apologies for that.
Cheers
Found it but was not able to get a definitive answer on what value it is... apologies for that.
Cheers
Last edited:
Capacitors cannot be measured with a regular multimeter. However, I think it must be of 1 uF or 3.3 uF.
Last edited:
wty4ka
Full Member
Measured on coolrunner rev.B Considering the fact that this multimeter has accuracy of +-3% at 40nF, this cap must be 1nF(not 1,45nF)