yeah the originals are playing ok. I checked with kprobe 2 and my results were under the guidelines suggested on the forum.
C4E’s iXtreme LT+ v3.0 in association with Team Jungle & Team Xecuter
- Thread starter Ubergeek
- Start date
krypt1c
VIP Member
yeah I am pretty sure I patched it correctly. I followed ubergeeks guide on how to use XBC and used the second median.bin file which says XGD3.
---------- Post added at 15:42 ---------- Previous post was at 15:38 ----------
If the originals are playing correctly that means that I flashed the firmware correctly right? then I don't know why it is showing me unsupported disk error.
---------- Post added at 15:42 ---------- Previous post was at 15:38 ----------
If the originals are playing correctly that means that I flashed the firmware correctly right? then I don't know why it is showing me unsupported disk error.
maybe double check you have flashed to lt3.0.you need to manually add it otherwise lt2.0 will autoload (will appear as lt1.1)
Last edited:
krypt1c
VIP Member
Try another burn , although by what you have said it was done correctly.
Or as talby has suggested.
Or as talby has suggested.
Last edited:
krypt1c
VIP Member
no idk why I didn't save the log for when I was flashing it with Lt 3.0 but I did save it when I was flashing the drive with stock. It should be similar except for target firmware.
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 3 I/O Ports.
Found 1 Com Ports.
Found 5 windows drives C: D: E: F: Q:
Found 1 CD/DVD drives F:
Loading firmware file C:\Users\user\Documents\XBOX 360\Hack (08-28-11)\Dummy.bin
MD5 hash: afcba084506f010941054d078cbe37f9
Inquiry string found
Identify string found
Drive key @ 0xA030
********************************
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:\Users\user\Downloads\Latest_iXtreme_and_Stock_Firmware_Pack(1)\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches
Target rev is LT 02510C, serial info not copied
Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x90
...........
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !
Sending Vendor Outro to port 0x0000
Drive is Lite-On..
Sorry a noobs questions but do I have to update the to the latest dashboard first then flash to lt+3.0
sick360mods
BANNED
Thanks guys cant wait for the slim!! but one question if u don't mind:
i donloaded the latest JF and i chosed ltpluse 3.0 but when i spoof it apper as lt pluse 1.1 is that normal?
i donloaded the latest JF and i chosed ltpluse 3.0 but when i spoof it apper as lt pluse 1.1 is that normal?
Thankyou all very much, appreciate that alot of work has gone into this fw.
TX and JF keep the modding scene alive :wink:
TX and JF keep the modding scene alive :wink:
Noob Question - sorry!
What should I do if I think I've been flagged? Before I updated to 2.0, I flashed to stock and applied the update. I then updated to 2.0. However, when I tried playing previously burned AP2.5 games, it told me disc error. However, all other games worked, and all other games burned since then work. I NEVER go on-line with this 360, I use another. I think it flagged me because I played Black Ops before the official release date (or maybe I just needed to re-burn Black Ops because of updated AP2.5 data, not sure which).
If I apply the dash update via USB, will I get banned? I don't want to risk updating on-line. Playing on-line is irrelevant to me but I like being able to put the games on the HD. Also, since I do not play on-line with this machine, do I really have to update the dash?
Any help would be greatly appreciated.
What should I do if I think I've been flagged? Before I updated to 2.0, I flashed to stock and applied the update. I then updated to 2.0. However, when I tried playing previously burned AP2.5 games, it told me disc error. However, all other games worked, and all other games burned since then work. I NEVER go on-line with this 360, I use another. I think it flagged me because I played Black Ops before the official release date (or maybe I just needed to re-burn Black Ops because of updated AP2.5 data, not sure which).
If I apply the dash update via USB, will I get banned? I don't want to risk updating on-line. Playing on-line is irrelevant to me but I like being able to put the games on the HD. Also, since I do not play on-line with this machine, do I really have to update the dash?
Any help would be greatly appreciated.
when i try to access youtube, xbox asks me to update the "game" aka youtube. is it safe for me update channels like these and install the game updates?