Cable to connect LVTTL to QSB

[tuxuser]

Hey guys,

I am looking for the Cable with 4-pin connector to connect a LVTTL to the J2B1 QuickSolderBoard of NAND-X (see picture).


A exact model name or even better a website in germany or near germany where i could buy this cable would be awesome.

 

[manwithoutname]

Doesn't exist I'm afraid. You either have to buy a whole complete NAND-X or see if someone got a spare one they want to rid of or sell ...

 

[tuxuser]

The thing is: I got the complete NAND-X set with every adapter and cable available. The strange thing is... there ISN'T ANY cable like that with 4 pins... just 3- and 2-pin cables.... wondering why there wasnt a 4-pin included

 

[manwithoutname]

It's not needed, only 2 wires need to be connected to the J2B1 point.

 

[tuxuser]

Did you even read my question and looked at the attached picture? I am talking about connecting a LVTTL (Low Voltage Transistor Transistor Logic) Board, which needs V+,GND,Tx and Rx == 4 pins. Look at the picture of the QuickSolder Board and you will see... the board has a socket especially created for THIS purpose... so i don't understand why there aren't any official cables available from T-X.. even if its most likely not used very much from the enduser.


edit: Problem solved http://tinyurl.com/c0nnect0r + http://tinyurl.com/crimpc0ntact