RGH Can a rdod be caused by rewriting the nand?

[SimonSez]

Hi all, here i am again.
Sorry but its to hard for me to solve this issue.
First i tried to read the nand and write the ecc image created.
From that point on when i ended with writing the ecc to the console, i believe the rdod started.
I did several resoldering after that and f#cked up the r3b15 pad, but was solved by help from Antalpromille, ty for that.
Now i still have the rdod with 0002 error, i can't find any short or can believe a mosfet is gone. So it got me thinking that i wrote a wrong image to the nand and it gave the rdod.
Would you please look into the log file and see if i did anything wrong.
I already tried connecting the jr programmer and wrote the nanddump back , but that did not help.

Did i make a fault and the nand is gone, can i build a Retail nand with the dumps i still have, am i totally on the wrong track and the 0002 error had nothing to do with the nand and its short or burned mosfet causing the 0002 error?

Thx alot for any help, i'm sorry but i should never started to even thin i could read the cpu key for extracing the dvd files.

The log is in this thread: http://team-xecuter.com/forums/showthread.php?148716-No-boot-nothing

 

[ablegepu]

we really need to see all pictures of the motherboard along with your coolrunner and your jrprogrammer (every point you soldered to on the board in clear pictures) post-out / cpu-rst / 3v3 / e / f / gnd and a screenshot of jrunner with your retail nand loaded into the source box then go ahead and add your log to this thread. all of this with good viewable pictures wil help us to help you diagnose what is wrong with the console and possibly fix it, plus it is a requirement to ask for support that you supply all of those things. if you post all the required pics and logs then you will get support for your problem.