the drive is not shown on JF and not respond to open close button.
can i do a bad flash recovery with PMT probe ?
can i do a bad flash recovery with PMT probe ?
can i bad flash recovery with PMT on lite-on 74850c ?
- Thread starter cwnorth
- Start date
phat lite-ons don't have the badflash PMT method
however, a simple intro works
1. send intro/device id to the port you are using for flashing (your drive won't be detected)
2. press yes
3. you will see ....... across the screen.
4. at this time, power off the drive, then power it back on
5. you should see 0x72, which will allow you to write to the drive
however, a simple intro works
1. send intro/device id to the port you are using for flashing (your drive won't be detected)
2. press yes
3. you will see ....... across the screen.
4. at this time, power off the drive, then power it back on
5. you should see 0x72, which will allow you to write to the drive
what chipset are you using?
download "CPU-Z"
go to the mainboard tab and tell me what is in your "chipset" and "southbridge" info
other recommendations:
if you are using onboard SATA, make sure you are using the primary port of the motherboard (SATA 0 on your motherboard, or SATA 1 if you don't have SATA 0)
if you are using a VIA card, make sure you are using the VIA 530C drivers (Windows V-RAID V530C), and that they are removed properly as in the JF tutorial
make sure you are using the primary port of the VIA card as well.
download "CPU-Z"
go to the mainboard tab and tell me what is in your "chipset" and "southbridge" info
other recommendations:
if you are using onboard SATA, make sure you are using the primary port of the motherboard (SATA 0 on your motherboard, or SATA 1 if you don't have SATA 0)
if you are using a VIA card, make sure you are using the VIA 530C drivers (Windows V-RAID V530C), and that they are removed properly as in the JF tutorial
make sure you are using the primary port of the VIA card as well.
The southbridge is AMD SB700
im using VIA PCI card via vt6421.
why 5.30c and not the lateset 5.90 ?
im using VIA PCI card via vt6421.
why 5.30c and not the lateset 5.90 ?